Injectors not firing on pass side????????????

[SVTCOBRRA]

i have a 96 cobra got the motor built and now that its back in the injectors on the pass side wont fire, had it running sounds nasty on 4 cylinders but i cant figure out why the pass side wont work any ideas???

 

[The Red Monster]

possibly the tps sensor isn't reading right? just a guess

 

[95PGTTech]

first thing to do would be to check for good power and good ground at each injector.
post up the results and we can then help you from there.

pure guessing isn't going to help anyone and is going to spend your money quick

 

[Cookieman00x]

Check your harnesses to make sure everything is connected properly, and that there are no bent pins in the connectors (if there could be). Are you still using an 03-04 setup? they might have a better idea on their forum...

 

[SVTCOBRRA]

fixed it had a wire sniped that shouldnt have been, thanks for the help

 

[RoadZOmbie]

When you had this problem did the CEL light come on?

 

[SVTCOBRRA]

yea but it was on b4 i pulled the motor for something else

 

[The Red Monster]

Im sure it did