I am installing a new set of springs on my car, but I have never done so without doing shocks also. Can I just compress the spring and take it out without removing anything else? Please LMK as I am ripping into it now.
Thanks
John
Thanks
John
Installing springs... what needs to be removed/
- Thread starter Trmin8r
- Start date
BelvedereGTX
Banned
John, you are going to have to remove a few things to get to them. I dont remember exactly what. But i tried to do it the easy way as well. I picked up a case of beer and just started taking things apart to get the arms to lower as much as possible. Edit. i found the same exact write up to do my springs. its for a 99 but the 03 is the same. Use this http://www.lx.net/jlynch/kbspring.htm
BelvedereGTX
Banned
no problem, its easy and also a pain in the ass. I had no help either except for some cold ones that made it go faster. Anyway good luck man. Take before and after measurements like i did.
BelvedereGTX
Banned
also careful with the speed bumps. I almost tore my exhaust off with my 1 and a half inch drop. Go over them on an angle
a great write up on removing springs can be found here
http://www.svtperformance.com/forums/showthread.php?t=302238
or search for h&r race spring install was a breeze, thats the name of the thread
http://www.svtperformance.com/forums/showthread.php?t=302238
or search for h&r race spring install was a breeze, thats the name of the thread
Users who are viewing this thread
