Intercooler Fluid

[Black03WPB]

Where can I get the Intercooler Fluid that I need for installing my Apten Ported Eaton?

Also, are the Apten directions the best directions to follow or are there an easy set to follow ( pictures would be great, as I dont know what the intercooler water cup thing is with 3 10mm bolts and 1 8mm bolt )


Thnks,
Ryan

 

[ChuckysSVT]

That is the cap...behind it are the 2 tubes that run to and from the intercooler. To get to the bolts you have to take out the intake bolts and "carefully" lift the whole intake/blower up in the front to get at the bolts. Be carefull not to thrash the gaskets. After you take off the cover...pull out the 2 tubes (they are about 3" long w/ o-rings on both ends.) this was the only confusing part of my install. If you follow the directions it is a breeze.

 

[BoneCrusher]

You have to get either one (gold or green) from a Ford dealer.

 

[Black03WPB]

You have to get either one (gold or green) from a Ford dealer.

Alright, thanks. I'll have to go pick up some of that, and some water wetter for my HE install.

Thanks,
Ryan