Is BAP ok with KB 2.4

[MYVENM]

I am about to finish up my 2.4 on my 03 and i already have the boost a pump, but i am worried if that is going to be enough. I am only going to run 17 psi on 93 octane. I had a ported eaton that made 516/526 and the BAP was never on due to the duty cycle never getting high enough. Thanks for any help. :beer:

 

[99riocobra]

from what i've seen that's what a lot of people do, run a BAP on the stock pumps.

on a side note, where in STL are you at? ever at Gateway or anything?

 

[GodStang]

I think you should be ok.

 

[RAZRS EDGE]

Stock pumps w/ a BAP and 60lb injectors are generally good to around 650rwhp. You should be fine. Just check the duty cycle.

-Graycen

 

[Screamin Cobra]

Stock pumps w/ a BAP and 60lb injectors are generally good to around 650rwhp. You should be fine. Just check the duty cycle.

-Graycen

^^^What he and Godstang said.

Besides, a buddy of mine got his 2.2KB tuned with 17lbs and 20lbs of boost and just has a boost-a-pump with stock pumps and made like 620-630 with the 20lbs. Not sure if you have the wiring upgrade but I would run that as well.

 

[MYVENM]

Thanks guys! Going to get it tuned on the 9th.:banana:

 

[slo-poc]

My race tune Im at 652 rwhp ,...and Im just about maxed with my bap......