K & N FIPK install questions

[goodquest]

I just purchased a K & N Fipk for my cobra and noticed in the installation instructions The mass air electrical connection is moved from the 10 o’clock position to the 12 o’clock position. Is there a reason for this or is it just for ease of connecting the
Electrical connection.

Thanks in advance

 

[PowerWheels]

I put mine at the 12:00 position, everything runs great. Go for it!

 

[goodquest]

Why did you move it from 10 to 12?

 

[1992B4C]

It has to be moved due to the offset of the bolt holes for the mass air meter. Shouldnt affect anything.

 

[hmwave]

Some folks had stalling at 12 o'clock so moved it back to 10, me included. No stalling since.

You have to drill a new bolt pattern but that was easy.

 

[goodquest]

Now that makes since, (bolt placement) so one out of three people had stalling problems with the Mass air @ 12 o’clock. I wonder if there is a difference between 1st run and 2nd run cobras. I guess I will install with the mass air @ 12 o’clock and see what happens.
Thanks for the information.

 

[1992B4C]

If you have the stalling problem, go get the stall fix flash from the dealer and dont worry about it anymore. I never had to stall to begin with but I had it done anyway when they replaced my tranny.