kb lc lines routing ?

[red gt500]

i bought i used 2.8 kit without any instruction and i just need to know where do i cut to fit the lc fittings
any one have a pdf file or a picture ?

 

[JB_2010GT500]

I don't know off the top of my head, but I'd give a shout to Van at Revan Racing. He may have a PDF of the instructions on hand.

 

[ShiftyThePirate]

I don't know off the top of my head, but I'd give a shout to Van at Revan Racing. He may have a PDF of the instructions on hand.

^^^ Nice grab by the way. :-D

 

[red gt500]

i just need a picture of the lc fittings to see witch coolant line i need to slice

 

[Robert M]

i just need a picture of the lc fittings to see witch coolant line i need to slice

It seems to me one "T" is different from the other "T". Look at them on the inside passage way, I believe one is smaller at one end for flow restriction? There is a correct hose placement for each "T".







R

 

[Robert M]

^^^^^Here is what I am talking about.

Same size ends............

Different size ends..........

I had a friend of mine powder coat the fittings and clamps so they will blend in...........

R

 

[Robert M]

The "T" fitting instructions for a 3.6LC install.........

^^^^^^^This should get you started in the right direction.






R

 

[jenkins_1120]

If you ever decide to use an ice tank you'll have to route them through the engine coolant system

 

[red gt500]

thats what am looking for thank you robert

 

[Kenne Bell]

Here is a drawing that might help.