Kenne Bell 2.2 Setup

[VAMPIR3]

Questions for you guys running a KB 2.2....

What pulley size do you run? (Upper/Lower)

How much Boost are you seeing?

What kind of numbers are you making HP/TQ?
And is it on 93 Pump Gas or Race Fuel? Post up both sets of numbers if you could.


And any other information you want to post about them or :beer:

 

[VAMPIR3]

Anybody??

 

[SVT03Chris]

Try posting this in Terminator Talk . . . . much less people visit here, even though this is technically the right area for your topic.

 

[Lights of Speed]

im around 620hp at 20psi and 19 deg timing! not sure my pulley combo but im running a boost bypass.

 

[Screamin Cobra]

Kenne Bell 2.2L


Street conservative 3.5 / 4# (17lbs) Seen 18lbs in cold weather
93 octane
579rwhp / 511rwtq

Aggressive 3.5 / 4# (17lbs)
93 octane
606rwhp / 535rwtq

Race 3.0 / 4# (21lbs) Seen as much as 22lbs in cold weather
93 octane - torco mix (converts to 104 octane)
643rwhp / 613rwtq

Other than that I'd recommend getting the new snout 2.2L Kenne Bell.

 

[VAMPIR3]

Kenne Bell 2.2L


Street conservative 3.5 / 4# (17lbs) Seen 18lbs in cold weather
93 octane
579rwhp / 511rwtq

Aggressive 3.5 / 4# (17lbs)
93 octane
606rwhp / 535rwtq

Race 3.0 / 4# (21lbs) Seen as much as 22lbs in cold weather
93 octane - torco mix (converts to 104 octane)
643rwhp / 613rwtq

Other than that I'd recommend getting the new snout 2.2L Kenne Bell.

Yep it does have the new snout design. Thats what the KB is coming with (3.5/4#) Combo for 17 pounds.....

What exactly does the Aggresive version of that mean?

 

[IKankerr]

Yep it does have the new snout design. Thats what the KB is coming with (3.5/4#) Combo for 17 pounds.....

What exactly does the Aggresive version of that mean?

probably more timing

 

[TwinTurbo4vGT]

mine with a 3" pulley should be around 19lbs.

 

[VAMPIR3]

mine with a 3" pulley should be around 19lbs.

You only run a 3" upper netting around 19lbs? No lower?

 

[TwinTurbo4vGT]

You only run a 3" upper netting around 19lbs? No lower?

it should be somewhere around there, as above a 3" with a 4lb lower is making about 22, mine will be running on a home made toluene/93 octane mixture, which will let me get more timing

 

[Screamin Cobra]

What exactly does the Aggresive version of that mean?

As IKankerr mentioned; just more timing added.
Air Fuels were around 11.7-11.9 across the chart.

3.0'' upper is a 17# pulley...however, its not unheard of for it to reach 18 OR 19lbs but don't count on it either.

 

[Tampa03cobra]

My car with a 2.93upper and no lower is around 20 psi, however on cold nights (under 50*) here in FL (sea level) I have seen 21+ psi by 6000rpm.

I have the "old style" with the catch can. It makes 619hp/602ft lbs on 93.

 

[VAMPIR3]

My car with a 2.93upper and no lower is around 20 psi, however on cold nights (under 50*) here in FL (sea level) I have seen 21+ psi by 6000rpm.

I have the "old style" with the catch can. It makes 619hp/602ft lbs on 93.

Man those are great numbers!

I have no clue which pulley setup to go with after reading all of this. I would like to make over 600/600 but also have a safe 93* tune as I rarely see the track....

 

[Screamin Cobra]

My car with a 2.93upper and no lower is around 20 psi, however on cold nights (under 50*) here in FL (sea level) I have seen 21+ psi by 6000rpm.

I have the "old style" with the catch can. It makes 619hp/602ft lbs on 93.

I notice in your sig you put [email protected]h pulley are you running for 18lbs with that 2.2L?

 

[cobra_vert03]

I'm in the process of building my KB car. its going to have a 2.2 with a 3" upper, 2# lower, long tube headers, bbk off-rd H with bassani cat-back. I figured I was going to get 19psi, but if thats what you guys are getting with just the upper, I might need a bigger pulley. :shrug:

anybody have similar mods?? what HP should I be looking for.