Kenne Bell 2.8H Pulley Change

[nothing]

I have the KB Pulley tool...I cant for the life of me get the bolt off.

how hard is this bolt to remove? I verified with TJ at KB that it is standard thread and not reverse so any suggestions on ways to remove it?

using the tool and a very long pull handle with a breaker bar.

 

[D-MANN]

A little more muscle is what im suggesting.You got everything you need.

 

[nothing]

...

 

[D-MANN]

mine was tight aswell.We used a snipe to get more levarage on the bolt.Came off easily with the snipe and little muscle.

 

[nothing]

snipe?

 

[torchanniv03]

BIG A** cheater bar... :shrug:

 

[MaximumVelocity]

Do you have the spanner wrench that goes in the 2 holes on either side of the bolt?

 

[nothing]

Do you have the spanner wrench that goes in the 2 holes on either side of the bolt?

yes

 

[nothing]

BIG A** cheater bar... :shrug:

tried...it is twisting the allen keys and hex sockets

 

[tnkucan]

go to the gym for a week then try it lol ...get it where you can push up on the tool and down on the rachet it should loosen

 

[wildstang_93]

i left the belt on mine and loosen'd it with an impact and put it back on with a torque wrench .

 

[nothing]

...

 

[nothing]

...