Kenne bell 2011 5.0 kit ONLY 10.66/133.6 623HP 11psi

Kenne Bell

Active Member
Established Member
Joined
Dec 5, 2003
Messages
1,024
Location
Southern California
Kenne Bell 2011 5.0 kit ONLY 10.66/133.6
623HP 11psi


First run down the track, Brandi Montague, co-owner of S.T. Motorsports, drove her 100% stock 2011 5.0 to an impressive 10.66 sec./133.6 MPH at 11psi (623RWHP/ 733EHP).
No aftermarket cool air kit or throttle body, NOS, cam, headers, heads, suspension, gears, etc. No “with...” and a supercharger kit.
Just a 100% stock automatic 5.0 with ONLY the Kenne Bell 2.8 Mammoth kit and a ST Motorsports conservative tune. Next week we turn up the boost and try for the 9's.
$6599 Factory Direct includes the 4.5" 1200hp rated Kenne Bell Mammoth Cool Air Kit at no extra cost. Kits are in stock but he first batch is sold out.
More kits available November 23. Options include the industry’s largest throttle body, 8 rib kit, 3.6, 4.2...lots of good supercharger stuff for the 5.0.

Kenne Bell
 

IUP99snake

The Shocker
Established Member
Joined
Dec 5, 2002
Messages
2,550
Location
Downtown Orlando, Florida
Amazing! It was only a matter of time.

I just had the chance to check out your website for the 5.0 kit. http://www.kennebell.net/KBWebsite/SC_pg/Mustang 5.0 (2011)/layouts/Mustang2011.htm

It looks like a lot of R&D went into the development of this system.

It was mentioned on the site that the stock fuel rails "will and do support 1200HP". There were several other references to "1200HP" on the page with regard to the mammoth blower, etc.

Does that mean that you've done a 1200 HP test with a 5.0 Coyote?

What's the most you've made with a Coyote motor?

Hoomer
 
Last edited:

Users who are viewing this thread



Top