Kenne-bell BAS help asap plz

[RedFire2003]

I have got the whole bas wired except for the wire that goes to the coil. which wire do I hook into? I need to find out asap as I have some races tonight and the car keeps blowing out the spark. Any pictures would be awesomw please help me!


Thanks,
Frank

 

[RedFire2003]

need help guys please

 

[RedFire2003]

hello I see views does no one run a boost a spark? All I need to no it which wire to tie into for the coils!

 

[LCCOBRA]

Sorry wish I could help. Someone that knows what their talking about will post. Man the site is running slow tonight.

 

[ShelbyGuy]

each coil is wired seperately to the ecu since there is no distributor. there is no one wire for 'the coils.'

contact your vendor for technical support...

 

[RedFire2003]

According to Kenne bell instruction there is a single wire that leads to each of the coils at a point before the main wiring harness which I found but dont know what wire it is that I splice into.

 

[RedFire2003]

bump still need help please!

 

[BIGGESTJOHNSON]

there is a wire that is common to all the coils, you tap into it for an aftermarket tach. The common wire to all the coils is the red wire, unsure of BAS instructions but this would be my guess.