Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
SVT Shelby GT500
Kenne bell boost a pump install 2010
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Nsssane1" data-source="post: 12204792" data-attributes="member: 138808"><p>Remember need black electrical tape, soldier gun. 2010 model, wire colors from Ford could change.</p><p> </p><p>Remove spare tire cover, remove trim panel that covers trunk latch(to have access to pump module's), 4 push pins, move tire pump.</p><p> </p><p>FPDM 2 (pass side)tan/purple cut wire connect blue fused wire from Bap to tan/purple wire that comes from fusebox. input</p><p>Connect blue unfused wire output to tan/purple wire that goes to FPDM2. soldier, add heat shrink,tape.</p><p> </p><p> </p><p>[ATTACH=full]370275[/ATTACH]</p><p> </p><p> </p><p>FPDM 1 (driver side)Purple/white cut wire connect red fused wire from BAP to purple/white wire that comes from fusebox. input</p><p>Connect red unfused wire output to purple/white wire that goes to FPDM 1. soldier, add heat shrink,tape.</p><p> </p><p> </p><p>[ATTACH=full]370276[/ATTACH]</p><p> </p><p> </p><p>Connect ground, twist boost switch wire together, mount boost a pump. (My 2010) had to mount at 9 oclock or so due to other spots uneven couldn't get all mounting screws in. Also turned upside down to make sure wires weren't tight.</p><p> </p><p>[ATTACH=full]370277[/ATTACH]</p><p> </p><p>Go in fusebox replace 15 amp fuse with 30 amp. 2010 fuse #13 & #14. done!!</p></blockquote><p></p>
[QUOTE="Nsssane1, post: 12204792, member: 138808"] Remember need black electrical tape, soldier gun. 2010 model, wire colors from Ford could change. Remove spare tire cover, remove trim panel that covers trunk latch(to have access to pump module's), 4 push pins, move tire pump. FPDM 2 (pass side)tan/purple cut wire connect blue fused wire from Bap to tan/purple wire that comes from fusebox. input Connect blue unfused wire output to tan/purple wire that goes to FPDM2. soldier, add heat shrink,tape. [ATTACH=full]370275[/ATTACH] FPDM 1 (driver side)Purple/white cut wire connect red fused wire from BAP to purple/white wire that comes from fusebox. input Connect red unfused wire output to purple/white wire that goes to FPDM 1. soldier, add heat shrink,tape. [ATTACH=full]370276[/ATTACH] Connect ground, twist boost switch wire together, mount boost a pump. (My 2010) had to mount at 9 oclock or so due to other spots uneven couldn't get all mounting screws in. Also turned upside down to make sure wires weren't tight. [ATTACH=full]370277[/ATTACH] Go in fusebox replace 15 amp fuse with 30 amp. 2010 fuse #13 & #14. done!! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
SVT Shelby GT500
Kenne bell boost a pump install 2010
Top