See video i posted, im not sure how the stock boots are supposed to install onto the koni struts
Last edited:
I thought that the koni dont use the stock boots. because they have a plastic ring/scraper on the shaft that keeps the shaft cleaned of debris.
Having said that, I was able to reuse my stock boot and rubber stop on the konis.
I slide them on before I did the install.
I used permatex and a tiewrap to hold the boot to the stop....later I had one boot get loose and put two short screws instead of the tiewraps.
OK the plastic thing keeps the shaft clean and is the koni "dust boot."
The bilstein dust boot, which you have there, obviously will not work on the koni.
I forgot the terminator came with bilstiens
The 99-01 cobra...and probably GT..oem strut rubber boot and dust cover will work on the koni.
If you cant find some online..maybe just take them off a junk yard car.
There may also be some stops you can get through maximum motorsports. I would cantact them.
The konis don't have internal bumpstops like the bilstiens; so you probably should have something in terms of a bump stop.
The MM CC plate bumpstops should work...BUT no dust boot....unless they sell one for it...it will fit the oem dust boot as it is a poly version of the rubber oem bump stop.
So i actually did call MM earlier today and they basically knew everything i was talking about however they never mentioned the dust boots you guys are talking about. I think thats crazy i would have to buy different boots from a different year car . Anyways i basically just transfered everything over from the stock struts including the boots, i also used the plastic scraper at the base. i took it for a little drive earlier and it drives like dream, still need to do the back
Well it is because the Terminator is a different beast in many regards.
Again it had the Bilsteins with the internal bump stops and thinner body/dust boot.
I forgot that and what forum I was commenting in..
That makes sense about the internal bumpstops, i was wondering why the cobra was the only one without the sleeve/bumpstop on every other new edge video i seen. I hope the Konis come with internal bumpstops then..