Pricing is as follows:
$399.95 + Shipping
The top hat includes:
# CNC Machined & Anodized Top Hat Assembly
# All Gas Blocked wiring for the Pumps, Ground and Level Sender including the proper spade connectors to connect the wires to each fuel pump
# Pre-cut and installed Gates 30R10 Submersible Fuel Hose for each pump
# All XRP an Fittings
# New Bolts for mounting the assembly to the fuel tank
You'll also have the choice of:
Single 8an Outlet (Built in Y Block) which includes an extra port for a return line
or
Dual 6an Outlets
-Accommodates Dual Ford GT fuel pumps as well as wiring for Single or Dual FPDM's (Fuel Pump Driver Module)
-Direct replacement and bolts right in using an OEM gasket for a perfect seal as well as using the OEM fuel sending unit in the same stock location.
-Eliminates the PPRV and offers a direct in-tank hose routing to both fuel pumps for optimum fuel delivery.
-Two pairs of gas blocked 12 gauge conductors using 12ga Mil Spec fuel resistant wires for fuel pump wiring to the FPDM(s). This allows your Ford GT pumps to operate without losses from undersized OEM wires and will help in dropping duty cycle. Wiring for the ground and fuel level sender also included.
-No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors.
-All assemblies are pressure tested prior to shipping.
The hat once in production will take about 4 weeks for us to get them. This factors in production time, anodizing and assembly. We will not be taking deposits however we will be more than happy to tak your name and information down to get one reserved for you. When they are complete and ready to ship you will be billed then. The first run will be limited to about 40 units which we feel will sell fairly quick so they'll be distributed first come first serve in the order we have on the list..
So feel free to give us a call and we'll be glad to put you down. Make sure to mention which style you want (Single 8an or Dual 6an)
Thanks, Jared@Lethal
