Lethal performance wiring harness routing

[Brandon03Cobra]

I was wondering how y'all routed the plug for the fuel hat out under the car. I went throughout the hole in the spare tire well and now that the tank is in place it's pinching the wire loom. I searched but didn't find any good info as how to route it. Thanks,

Brandon

 

[Sick SVT]

I also went out the plug in the floor. Its tight but I still have some play on mine. I went out the larger hole on the passenger side of the floor.

 

[cj428mach]

I don't have the lethal kit, I have the Fore kit. I went out the rubber grommet in the drivers frame rail and ran the wires behind the rear of the tank then followed the stock harness on the pass. side of the tank.

 

[Cobra03SC]

I went through the grommet in the trunk and behind the tank (toward the front of the car) and there's enough room to fit once you get the wires to the middle of the tank.

 

[jblood37]

I don't have the lethal kit, I have the Fore kit. I went out the rubber grommet in the drivers frame rail and ran the wires behind the rear of the tank then followed the stock harness on the pass. side of the tank.

That's what I did.