I have located a new L supercharger,intake,intercooler,and hoses does anyone know what else I would need to install this onto my 97 f250 I know I will need new PI heads,and throttle body but would anyone know who has done this and what else I will need ? and part #s thanks
lightning supercharger?
- Thread starter Digger
- Start date
You will also need the wiring harness and computer and overflows...can't think of anything else right now
Thor01
New Member
Digger,
Once you get this set up on. I would recomend lowering the boost. The stock F-250 engines do not have forged pistons like the Lightnings have.
You will also need a chip to work out the bugs. I would get with a tuner. The F-150 calibration on the PCM will have different load settings in relation to vehicle weight. Sorry can't give specifics.
A good tuner would know what needs to be done. And do this on a dyno if you can.
Best of luck.
Once you get this set up on. I would recomend lowering the boost. The stock F-250 engines do not have forged pistons like the Lightnings have.
You will also need a chip to work out the bugs. I would get with a tuner. The F-150 calibration on the PCM will have different load settings in relation to vehicle weight. Sorry can't give specifics.
A good tuner would know what needs to be done. And do this on a dyno if you can.
Best of luck.
Last edited by a moderator:
Users who are viewing this thread
