Lowering my 04 Corbra

[Ganoog]

Hi guys, I finally made it & bought a SVT 2004 Red Cobra Coupe.

I need to lower the car, so any suggestions :idea: on recommended springs or suspensions.

Any comment will help, pls. :bowdown:

 

[RedfireSVT]

You're in the right forum, now just use the search function. There are a bunch of threads regarding lowering your Cobra. Congrats on the purchase and welcome to SVT.

 

[astippich]

kenny brown springs if your just gonna do springs, otherwise mm coilovers

 

[RB8888]

what he said^^^.

 

[Sonik Blur]

I'd say go with H&R's either Super Sports for real low or Race Springs for low, but not too low. Or you could go the cheap way and cut the springs, but I wouldn't recommend it.

-Mike

 

[96stanggt]

Just cut the stock springs 3/4 a coil.....the stock springs are linear rate so the spring rate won't change if you cut them...

 

[Ganoog]

Thks to all 4 the replies.

 

[QWKRN U]

http://www.svtperformance.com/forums/showthread.php?t=228578
If you deciede to cut. Save the money and buy a pulley :rockon:

 

[stangkid]

Buy H&R SS springs.

 

[BO TY KLR]

H&R SS with stock isolators.

 

[DKS2814V]

Here is what you can do with a coil-over kit....

I have it lowered quite a bit, but it still rides nice and it handles with insanity.

 

[I-CAN-STANG]

coilovers! :rockon: I have the H&R SS springs but should've done coilovers from day one.

 

[Ganoog]

Thks guys, it was really a helpful info.

 

[lukem80]

i've rode in one that had 1 coil cut on both front and rear.... I got in my 'stock' one... and it pretty much rode the same....

I'm thinking about cutting my stock springs 3/4-1 coil and using MM iso's

save my 'spring' money for some full length MM subframes

 

[DitchTehFish]

Kenny Brown springs!!