I have the 427-crate motor in my 95 R and a friend is about to give it a new tune. The specs are close to the comp cams XR 294 RF-HR but ford paperwork has a slightly higher lift. We need events for intake and exhaust open and close for something he wants to do as far as firing the injectors. Any help would be appreciated.
M 6007 Z427FRT cam specs
- Thread starter 598
- Start date
Depending on what he's using to tune he might just be better off adjusting the injector timing while the engine is running. If the cam was degreed and where it was installed will make a difference on that.
Users who are viewing this thread
