Starting to wire in a quick 6 ( transmission controller ) and it asks to splice into the main ground as close to the ecu as possible. I see 5 grounds total according to the pinout diagram.
Pin 25# Black, is grounded a couple inches away from pcm to frame.
Pin 76# & 77#, BL/WH.
Pin 51#, BL/WH.
Pin 103#, BL/WH.
So I guess my question is which would be the best to tap into?
Thanks.
Pin 25# Black, is grounded a couple inches away from pcm to frame.
Pin 76# & 77#, BL/WH.
Pin 51#, BL/WH.
Pin 103#, BL/WH.
So I guess my question is which would be the best to tap into?
Thanks.
Last edited: