Master Mod Lists....Let's See Them!!!!!!!

[Rail1]

Just mods 18k range. mods in sig....

 

[Speedwagon]

i'm scared to make a list of what i've spent on my car.. I don't want to go into deep depression..

x2 ...

 

[97CasperCobra]

Mod list (Might forget to add a few)
Suspension:
H&R SuperSport Springs
Tokico Adjustable Shocks
H&R Wheel Spacers
MM Panhard Bar
MM Rear Lower Control Arms
Kenny Brown Extreme Matrix Subframe Kit
03/04 Cobra Front Control Arms
Fays2 Watts Link (Not yet installed)

Drivetrain:
MGW shifter
MM Clutch Cable Quadrant
Cobra R/Bullitt pedals
Ford Racing Aluminum Driveshaft
TrueTrac Differential
FRPP 4.10 gears
Moser 28 spline Axles
T/A Cover
2000 Cobra R rims
2003 Cobra rims powdercoated white

Engine:
C&L Intake tube
K&N Cone filter
2012 Mustang GT Engine (not yet installed)
FRPP Control Pack (not yet installed)
Power By The Hour Accessory Brackets (not yet installed)
MM Severe Duty Oil Filter Relocation Kit (not yet installed)
Moroso Oil Pan (not yet installed)
Russell Fuel Regulator & Lines (not yet installed)

Exhaust:
Bassani O/R X-pipe
Borla mufflers
BBK Long Tube Headers (not yet installed)
BBK Catted X-pipe (not yet installed)

Exterior:
Front clear turn signals
Rear bumper clear reflector lens
Cobra grill emblem
S281 Saleen Spoiler
Scott Winger Build Numbers

NEED TO ORDER:
Battery Relocation Kit
MM Maximum Grip in a Box
Willwood Superlite 6-piston
Racing Seats
MM 4-point cage
5-point harness

Not going to even add cost to this.....

 

[98$vt]

My mod list is short:

Exterior:
Eibach pro kit
Am smoked headlights
Smoked tails
DDM tuning 5k hids
DDM tuning 5k fogs
20% tint
Authentic saleen s281 wing painted to match
Led license plate lights
Anthracite AM 18x9/10 fr500
Nitto 555 275 up front
Continental extreme 295 rears
Black painted roof
Bassani catless x pipe
Bassani stainless mufflers

Interior:
03 light suede seats
Led dome light
Led cluster lights
Alpine headunit with pandora
Custom painted shift knob
Pro 5.0 with tri ax handle
Svt tech overlay
Glowshift oil pressure pillar gauge (white face)

Engine/trans/drivetrain:
04 Mach 1 engine
04 cobra valve covers (wrinkle black)
01 cobra upper intake hat
Custom ram air
K&n filter
Spec aluminum 11in flywheel
King cobra clutch
T45 out of a 97 gt with tail housing swapped "built"
FRPP 4.10
Full length subframes welded in
Yukon axles


*waiting on a tune
*cop swap harness in the mail somewhere

 

[redrocket16]

Not gonna add prices so I don't incriminate myself much like Tabres but heres a list:

Exterior:
96-98 Export Taillights
96-98 Export Mirrors
Custom StockDB HID retrofitted headlights (lights purchased from AM to make these)
Powdercoated stock brakes
Saleen reps 18x9, 18x10 with nitto all around


Interior:
Double DIN CD player swap with Kenwood HU
Focal 165 v30 6.5 component speakers up front
Focal 5x7 in the rear deck
Dynamat extreme on the entire car including roof
Alpine PDX 4x100
Alpine PDX 1x500
JL Audio 15" W3v2 in custom fiberglass box
various interior billet pieces
01-04 center console swap
04 Dark suede Cobra interior seats front/rear

Motor/Performance:
03-04 terminator drivetrain swap including motor/trans/entire wiring and gauges.
Fore level 1 fuel system with upgraded controller, 2 walbro pumps
04 IRS with FTBR bushings, powdercoated
magnaflow IRS catback
Bassani ORX
K&N CAI
MAFia
MM caster camber plates
Bilstein shocks/struts all around
H&R race springs

 

[AZSN95SNAKE]

Not gonna add prices so I don't incriminate myself much like Tabres but heres a list:

Exterior:
96-98 Export Taillights
96-98 Export Mirrors
Custom StockDB HID retrofitted headlights (lights purchased from AM to make these)
Powdercoated stock brakes
Saleen reps 18x9, 18x10 with nitto all around


Interior:
Double DIN CD player swap with Kenwood HU
Focal 165 v30 6.5 component speakers up front
Focal 5x7 in the rear deck
Dynamat extreme on the entire car including roof
Alpine PDX 4x100
Alpine PDX 1x500
JL Audio 15" W3v2 in custom fiberglass box
various interior billet pieces
01-04 center console swap
04 Dark suede Cobra interior seats front/rear

Motor/Performance:
03-04 terminator drivetrain swap including motor/trans/entire wiring and gauges.
Fore level 1 fuel system with upgraded controller, 2 walbro pumps
04 IRS with FTBR bushings, powdercoated
magnaflow IRS catback
Bassani ORX
K&N CAI
MAFia
MM caster camber plates
Bilstein shocks/struts all around
H&R race springs

You could make up some of that cash you've spent by selling me those export tail lights

 

[redrocket16]

You could make up some of that cash you've spent by selling me those export tail lights

If I gotta sell a part it will probably be those actually. I might be able to make a set of mirrors out of 03-04 but the mirrors are a rarer find than the taillights. I'm trying to get the car painted right now and I may need to find some quick funds for the paintwork too. I couldn't believe what the last set went for on ebay, craziness.

 

[Tabres]

If I gotta sell a part it will probably be those actually. I might be able to make a set of mirrors out of 03-04 but the mirrors are a rarer find than the taillights. I'm trying to get the car painted right now and I may need to find some quick funds for the paintwork too. I couldn't believe what the last set went for on ebay, craziness.

I can't believe people actually pay that much for them. It's insane.

Would I love to have a set of the mirrors and taillights? Absolutely. Am I going to pay as much as a used blower would cost to get them? Not a chance.

 

[1BD9D7]

The look of those lights has grown on me over time and they usually look great, but my car will never have them for the same reason my 07 F150 does not have the harley edition grille - $

 

[PACIFICGREENSVT]

This list does not include my first set up with the v1 s/trim & supporting mods or my old suspension or the c4auto lol

tune from Lidio- 550
04 engine- 4500
bulletproof 4r70w & converter- 3600
2nd gen Whipple 2.3 used- 2300
1000hp sleeper tank fuel system- 1500
fuel rails-can't remember
full team Z suspension- 3400
31 spline axles- can't remember
410 gears- can't remember
04 cobra wheels- can't remember
team Z frame connectors- can't remember
Canton overflow tank- can't remember
Canton heat exchanger tank- can't remember

Now the more I think about I don't even want to add it all up.

Dave

 

[Fox 5.0]

Well, you can see my mods in my Mini 'Build' Thread, but listed out they are:

Drivetrain:
-MGW Short Shifter w/Roush knob
-FRPP 3.73's (w/rear end rebuild kit)
-K&N Filter

Brakes:
-Hawk HPS pads
-MM SS Brake Lines
-Blank OEM Cobra Rotors
-New Brake Fluid

Suspension:
-MM Adjustable LCA's
-MM CC Plates
-MM Pinion Snubber
-MM Rear Lowering Springs
-Koni 'Yellow' Struts
-MM Font Coilover Kit
-MM FLSC's

Interior:
-Corbeau Legacy's

Exterior:
-8" Antenna
-DDM Tuning HIDs Headlights/Foglights
-18x9/18x10 Silver Saleen reps
-Bridgestone Potenza RE760 Sport 275/295's
-Tint (35%/15%)

 

[96dreamer]

I keep a list only for the day I might be forced to sell it. Full c head swap and parts are sitting ready to go on at the moment as well.

Drivetrain

Engine-4.6L 32 Valve DOHC
Stock tekskid block, prepper by phase 2 machine, St.Louis Mo
Forged Cobra 8 bolt Crank
Forged Manley H-Beam rods
Forged Ross flat top pistons 10.5:1 comp
IMRC deletes
March 1157 underdrive fluid damper w/ water pump pulley
ARP head studs and rod bolts
Custom Head coolind mod
C.O.P conversion
6 position switch with Custom N.A. and nitrous tunes with theft mode
R.A.I. with 9” air filter
BBK long tubes
O/R BBK x pipe
Borla Pro XS catback
Powdercoated Valve Covers,Intake, Intake Tube, Timing Cover
EGR and SAI Delete
Steeda Aluminum Radiator
Walboro 255 fuel pump
Air/Oil seperator
180* stant thermostat

Nitrous System
175 wet shot
Cold Fusion Solenoids
SS 4-A.N lines
Shark NX nozzle
MSD Digital Window Switch
W.O.T switch
Bottle heater with pressure switch
Purge
Digital Fuel Pressure Gauge
Mechanical Nitrous Pressure Gauge
Relays wired for bottle heater and activation switch
Custom ashtray switch panel with Activat,Purge And heater switches
2 10lb bottles

Transmission-03/04 Cobra T-56
26 spline input shaft
MGW Orange handle short throw shifter
Anti Venom Mod
Penzoil Syncromesh
03 cobra aluminum flywheel
McLeod RXT twin disk clutch
FRPP HD T.O.B
UPR Clutch quadrant and firewall adjuster
LDC freeplay mod
Dallas Mustangs E.R. Speed Calibrator
Aluminum 03/04 cobra driveshaft

Rear End
8.8 Housing
Welded Tubes
Ford 9’ ends with big bearings
Moser 31 spline hardened axles
Moser 3’ wheel studs
4.10 FRPP gears
03 cobra 31 spline carrier with carbon friction disks
Moser Aluminum Girdle
Fully powdercoated gloss black
Solid Upper Housing Bushings
Modified stock brake brackets to accept stock brakes

Chassis

Wheels Tires
17x9 & 17x10.5 Machined face 03/04 cobra rims
255/45/17 Nitto 555 and 315/35/17 Nitto 555r

Brakes
Drilled and Slotted rotors Front and Rear
Red powdercoated Calipers and Black Brackets
Line lock with custom wiring
ABS delete

Suspension
Strange 10 way adjustable shocks and struts
Strange front coil overs
Eibach pro kit rear springs
Maximum Motorsports 4 Bolt Caster Camber Plates
Tubular SVE rear lower control arms
Dual Adjustable upper Control Arms
Full length subframe connectors
team z tapered bump steer kit
Torque box reinforcements with fully welded stock seams

Exterior
Custom Nissan Daytona Blue paint
Gloss black engine bay and hood
Shaved antenna and door locks
Shaved decklid with no spoiler
95 cobra “V6” rear bumper with vinyl inserts
Moved fuse box and wire tuck in engine bay
Redline Tuning hood struts
Smoked 4 piece headlights with 6000K bi-xenon HIDs
Stock fogs with 6000k xenon HIDS
Professionally smoke tail lights with hardwired sequentials and custom flasher module
LED license plate lights
Window tint-15% rear and quarter, 35% side, and 15% front eyebrow

Interior
New black carpet
Two tone cloth V6 seats
4 piece Bullit pedals Alpine head unit
Auxiliary input and iPod integration
Chrome AC knobbies (plati dipped)
Custom wheelskinz wrapped steering wheel
Redlinegoods leather shift boot and ebrake boot
Auto Meter Dual Gauge Instrument Bezel-2-1/16”
White Gauge cluster/hvac LED lights-Changes from the stock green to blue lights.
Stock 03 cobra shift knob
“SVT” tach decal

 

[redrocket16]

I can't believe people actually pay that much for them. It's insane.

Would I love to have a set of the mirrors and taillights? Absolutely. Am I going to pay as much as a used blower would cost to get them? Not a chance.

I paid what I felt was a fair price for them and they were costly, not the outrageous prices I have seen recently. I still need to get the mirrors painted and the taillights installed though haha.

 

[Tunedprt91]

What prices kind of prices are you guys seeing lately for the tails? I have some on my car but I didnt pay anything crazy.

 

[Tabres]

What prices kind of prices are you guys seeing lately for the tails? I have some on my car but I didnt pay anything crazy.

The last complete set of tails that I saw was like $700.

 

[Tunedprt91]

You guys had me thinking they were higher than that, I was getting ready to sell lol. I have the set on my car and I have a brand new passenger side export in the box. Ive been searching for the driver side but cant find one. If I ever find the driver side I might sell since the price went up some but its also nice to have extras laying around lol.

 

[redrocket16]

The last set went up to 793 and the guy didn't even sell at that price. I got mine for less than half of that.

 

[LDC2335]

I keep a list only for the day I might be forced to sell it. Full c head swap and parts are sitting ready to go on at the moment as well.

Drivetrain

Engine-4.6L 32 Valve DOHC
Stock tekskid block, prepper by phase 2 machine, St.Louis Mo
Forged Cobra 8 bolt Crank
Forged Manley H-Beam rods
Forged Ross flat top pistons 10.5:1 comp
IMRC deletes
March 1157 underdrive fluid damper w/ water pump pulley
ARP head studs and rod bolts
Custom Head coolind mod
C.O.P conversion
6 position switch with Custom N.A. and nitrous tunes with theft mode
R.A.I. with 9” air filter
BBK long tubes
O/R BBK x pipe
Borla Pro XS catback
Powdercoated Valve Covers,Intake, Intake Tube, Timing Cover
EGR and SAI Delete
Steeda Aluminum Radiator
Walboro 255 fuel pump
Air/Oil seperator
180* stant thermostat

Nitrous System
175 wet shot
Cold Fusion Solenoids
SS 4-A.N lines
Shark NX nozzle
MSD Digital Window Switch
W.O.T switch
Bottle heater with pressure switch
Purge
Digital Fuel Pressure Gauge
Mechanical Nitrous Pressure Gauge
Relays wired for bottle heater and activation switch
Custom ashtray switch panel with Activat,Purge And heater switches
2 10lb bottles

Transmission-03/04 Cobra T-56
26 spline input shaft
MGW Orange handle short throw shifter
Anti Venom Mod
Penzoil Syncromesh
03 cobra aluminum flywheel
McLeod RXT twin disk clutch
FRPP HD T.O.B
UPR Clutch quadrant and firewall adjuster
LDC freeplay mod
Dallas Mustangs E.R. Speed Calibrator
Aluminum 03/04 cobra driveshaft

Rear End
8.8 Housing
Welded Tubes
Ford 9’ ends with big bearings
Moser 31 spline hardened axles
Moser 3’ wheel studs
4.10 FRPP gears
03 cobra 31 spline carrier with carbon friction disks
Moser Aluminum Girdle
Fully powdercoated gloss black
Solid Upper Housing Bushings
Modified stock brake brackets to accept stock brakes

Chassis

Wheels Tires
17x9 & 17x10.5 Machined face 03/04 cobra rims
255/45/17 Nitto 555 and 315/35/17 Nitto 555r

Brakes
Drilled and Slotted rotors Front and Rear
Red powdercoated Calipers and Black Brackets
Line lock with custom wiring
ABS delete

Suspension
Strange 10 way adjustable shocks and struts
Strange front coil overs
Eibach pro kit rear springs
Maximum Motorsports 4 Bolt Caster Camber Plates
Tubular SVE rear lower control arms
Dual Adjustable upper Control Arms
Full length subframe connectors
team z tapered bump steer kit
Torque box reinforcements with fully welded stock seams

Exterior
Custom Nissan Daytona Blue paint
Gloss black engine bay and hood
Shaved antenna and door locks
Shaved decklid with no spoiler
95 cobra “V6” rear bumper with vinyl inserts
Moved fuse box and wire tuck in engine bay
Redline Tuning hood struts
Smoked 4 piece headlights with 6000K bi-xenon HIDs
Stock fogs with 6000k xenon HIDS
Professionally smoke tail lights with hardwired sequentials and custom flasher module
LED license plate lights
Window tint-15% rear and quarter, 35% side, and 15% front eyebrow

Interior
New black carpet
Two tone cloth V6 seats
4 piece Bullit pedals Alpine head unit
Auxiliary input and iPod integration
Chrome AC knobbies (plati dipped)
Custom wheelskinz wrapped steering wheel
Redlinegoods leather shift boot and ebrake boot
Auto Meter Dual Gauge Instrument Bezel-2-1/16”
White Gauge cluster/hvac LED lights-Changes from the stock green to blue lights.
Stock 03 cobra shift knob
“SVT” tach decal

Pic of the plastic dipped billet a/c knobs?
That's the one area of the interior that I think looks old but can't do anything about. . I'm not a fan of the billet stuff or the white face a/c panel. . . I even painted my Bullitt shifter bezel ring black and plan to paint my chrome gauge rings eventually. My cars overall theme is stock but modern. Most non mustang guys can't tell the majority of my mods except maybe the gauges.

 

[rideorange812]

I have 60k in my car... and thats not counting that I have painted my car 3 different times. I have a build list that I stopped counting at 40k a year ago..lol