Im thinkin of either gettin a vette or an older cobra to do a build on. Just thought Id throw this out there. Anyone with a clean 99-01 cobra that wants to step up to a whipple charged cobra with a solid rear ? I would need at least 15-18 grand cash along with the car. I'd like something with a clean straight body , mods dont matter. I might sell outright too, make me an offer. I know I have seen countless clean low mile 99-01's goin for less then 13k. I turned down an offer of 30k on my car recently so I know what its worth. Its a competition orange 04 cobra, the only year this color was produced. Just hit 28k miles. Even if you found a stock one for 28k, it would take at least another 15 grand to get it where my car is now. Good luck even findin one in this color anyways you look at it. The 315/30/18 BFG drag radials have 200 miles on them, I just got them last week ! Those alone were $600. Heres a list of mods
Suspension:
MM Isolators
MM C/C plates
MM Full Length Subs
MM front control arm bushings
MM aluminum rack bushings
Kenny Brown Rear Shock Tower Brace
(Built Solid Axle) welded axle tubes
3.73 gears
TA girdle cover
Ford Truck Carrier
Moser 31 spline axles
Steeda Adjustable Lowers
UPR Double Adjustable Uppers
Lakewood 50/50 shocks
Lakewood 70/30 struts
UMI Torque Boxes Reinforcements
Exhaust:
Bassani SS Mid-Length Headers
Bassani SS catted X-pipe
Mac 3 inch catback
Engine/Cooling:
EGR Delete
JLT CAI w/ 12" filter
Billet Flow 4 piece Idler set
LFP Heat Exchanger
Presicion Fab Intercooler Reservior Tank
Canton Racing Engine Coolant Tank
60lb. injectors
Twin Focus Pumps
MJChip FPDM
SCT 2400 MAF
Riechard Racing Manual Tensioner
3.50" and 3.1 RR upper(current)Blower Pulley
FRPP Whipple Supercharger
Kenne Bell polished single blade Throttle Body
Crank pulley system (4lb)
Centerforce DFX
Liberty gear 26-spline input shaft
Fidanza Flywheel
MM quadrant/firewall adjuster
Misc:
Snake Emblem
MGW shifter with blue handle
MGW composite race knob
Redline Tuning Hood Struts
Hilton Boost-Overlay (16psi)
Speed of Sound A-pillar pod
Autometer Ultralite Boost gauge
Autometer Ultralite Fuel Pressure gauge
Underside hood one off custom(coated)
Decklid custom flat black
Black FR500 18*9 / 18*10
Raptor Shift-Light
Saleen Spoiler
Tinted windows (35%)
Suspension:
MM Isolators
MM C/C plates
MM Full Length Subs
MM front control arm bushings
MM aluminum rack bushings
Kenny Brown Rear Shock Tower Brace
(Built Solid Axle) welded axle tubes
3.73 gears
TA girdle cover
Ford Truck Carrier
Moser 31 spline axles
Steeda Adjustable Lowers
UPR Double Adjustable Uppers
Lakewood 50/50 shocks
Lakewood 70/30 struts
UMI Torque Boxes Reinforcements
Exhaust:
Bassani SS Mid-Length Headers
Bassani SS catted X-pipe
Mac 3 inch catback
Engine/Cooling:
EGR Delete
JLT CAI w/ 12" filter
Billet Flow 4 piece Idler set
LFP Heat Exchanger
Presicion Fab Intercooler Reservior Tank
Canton Racing Engine Coolant Tank
60lb. injectors
Twin Focus Pumps
MJChip FPDM
SCT 2400 MAF
Riechard Racing Manual Tensioner
3.50" and 3.1 RR upper(current)Blower Pulley
FRPP Whipple Supercharger
Kenne Bell polished single blade Throttle Body
Crank pulley system (4lb)
Centerforce DFX
Liberty gear 26-spline input shaft
Fidanza Flywheel
MM quadrant/firewall adjuster
Misc:
Snake Emblem
MGW shifter with blue handle
MGW composite race knob
Redline Tuning Hood Struts
Hilton Boost-Overlay (16psi)
Speed of Sound A-pillar pod
Autometer Ultralite Boost gauge
Autometer Ultralite Fuel Pressure gauge
Underside hood one off custom(coated)
Decklid custom flat black
Black FR500 18*9 / 18*10
Raptor Shift-Light
Saleen Spoiler
Tinted windows (35%)