MM Subframe Full Lenght Connector Installation Question

[projectslideway]

Question,

I have my MM subframe connectors ready to be installed and have finally found a chunk of time in which I can do them. However, I'm planning on switching from the factory t45 to a T56 Magnum in the spring, which will require me to relocate the transmission crossmember in the car.

Can I install the subframe connectors now, make the appropriate notch in the 96-98 trans crossmember continue to use the t45 until spring and STILL be able to relocate the crossmember? Thanks!

 

[Helomech74]

Just use a transmission crossmember from Stifflers for the T56 swap and don't worry about it. You can weld the subframe connectors in, get the stifflers crossmember and not have to worry about relocating the brackets.

 

[fastferndog]

Just use a transmission crossmember from Stifflers for the T56 swap and don't worry about it. You can weld the subframe connectors in, get the stifflers crossmember and not have to worry about relocating the brackets.

I used the Stifflers and it fit like a glove. Highly recommend it

 

[fastferndog]

I'll take another picture so you can get a better view. Go ahead and get your MM subs welded in!!!