I have a used kit from Hellion for a 2 valve and 4 valve. It has a Turbonetics T76mm (.96 a/r w/ F1 68mm turbine). It has some age to it, but is in FULL working order with zero problems. It has been modified by me to be a blow through setup that dumps to atmosphere. I've also replaced the BOV with a Tial Q 50mm. The gate spring has been shimmed to provide 15lbs off the gate and I've seen 28psi off a manual boost controller. I've also added a $400 Procharger inlet elbow for an oval throttle body. The visible cold side is 3 1/2" and powder coated black. I ran a 3 1/2 Pro-M flow tube (not included). Both the down pipe and feed pipes have new lava wrap on them. It also has both crossovers for either automatic or manual transmissions. I believe I still have the original inlet piping laying around as well.
This is not a box stock kit, it does not contain every last nut and bolt like Hellion ships it. I will give you everything that you need to make it work, but I didn't buy it new myself, so I myself don't have every last nut and bolt. That being said, any experienced car guy can get this all mounted up with very little effort. The core components and brackets are all there. You'll just need to bend a line here or there there type stuff.
This setup right at 800hp at the tires through a T56 on my built 2 valve.
I'll get pictures of everything laid out tomorrow and post them.
Asking $3500 OBO (price is somewhat negotiable, but please no low-ballers, you can't get a turbo setup like this anywhere else this cheap).
I've decided to include my dynomax race bullets and flowmaster tail pipes as they had to be angled slightly to work with the Y pipe that TBC fabricated.
Below is the rough list of what all is included.
(1) Turbonetics 76mm Turbo
(1) Turbosmart Ultragate Wastegate
(1) Bar And Plate Intercooler 24x6x3
(1) Tial Q Blow Off Valve
(1) Main Turbo Feed Pipe
(1) Automatic Transmission Crossover Pipe
(1) Manual Transmission Crossover Pipe
(1) Downpipe
(1) Exhaust Double Barrel
(1) Faux Catalytic Converter
(1) Exhaust Y-pipe (Was missing, I had one made)
(1) Small Wastegate Pipe
(1) Intercooler Pipe 1
(1) Intercooler Pipe 2
(1) Boost Inlet Pipe/Powder Coated
(1) Procharger Boost Inlet Elbow/Powder Coated
(1) Radiator Hose 1 5/8 Polished
(1) Turbo Support Bracket
(1) Intercooler Support Bracket
(1) Coolant Can Support Rod
(2) Ps Line Splices 3/8" (Missing, I didn't need)
(1) Ps Line Hose 10"Each/28 Ft (Missing, I didn't need)
(4) Ps Line High Pressure Clamps 3/8" (Missing, I didn't need)
(1) Oil Feed Line 47" #4
(2) 1/8 Pipe To #4 90 Degree AN Fitting
(2) 2 Inch Hose Clamps For Radiator Hose
(4) 3/4 Inch Hose Clamps/Idle Hoses
(4) 5/8 Breather Hose Clamps
(4) 4 To 4.5 Inch Hose Clamps
(4) Bypass Hose Clamps
(2) Metric Stainless Bolts For Wastegate
(2) 5/16 Stainless Bolts For Wastegate 1" Long
(1) Metric Bolt For Turbo Support Bracket/38mm Long
(1) Metric Bolt For Turbo Support Bracket/35mm Long
(2) Metric Bolts From Intercooler To Radiator Support
(4) Washers For Metric Bolts (Missing, I replaced)
(1) 1/4 X 3/4 Bolt Ps Line Cooler Bracket (Missing, I didn't need)
(2) 1/ 4x 3/4 Bolt For Elec Box Relocation (Missing, I didn't need)
(3) 1/4 Inch Nylock Nuts
(6) 1/4 Inch Washers
(1) Adel Clamp For A/C Line 5/16" Hole (Missing, I didn't need)
(1) 5/16 X1/2 Bolt To Secure Adel Clamp To Boost Hose (Missing, I didn't need)
(1) 5/16 Inch Washer
(2) Metric Bolts For Oil Drain To Turbo (Missing, I didn't need)
(2) Washers For Oil Drain (Missing, I didn't need)
(4) 3/8 X 1 1/2 Bolts, Nuts, And Washers For Turbo To Turbine Inlet
(2) 3/8 X 1 3/4 Bolts And Washers For Crossover Connection
(3) 3 Inch Torque Clamps For Exhaust
(1) Rubber Dog Bone 1.75" Center To Center
(1) Hanger For Exhaust
(0) 3/8 X 2.5 Bolts, Nuts, And Washers For Y-pipe To Mufflers (I replaced with vband clamps)
(2) Turbo Bracket Spacers Aluminum (Missing, I used washers)
(3) 5/16 X 3/4 Bolts, Nuts, And Washers For Intercooler Support Bracket, Exhaust Hanger
(1) #10 Straight Hose Fitting
(1) #10 90 Degree Hose Fitting
(1) #10 Line, Steel Braided, 1 Foot
(1) 3/8 To #10 Oil Return Fitting
(6) 2.5" Stainless T-bolt Clamps
(5) 3.5 Inch Stainless T-bolt Clamps
(1) 3 Inch V-band Clamp For Turbo Outlet
(1) 4"/3.5" Long Silicone Hose Piece
(1) 4"/2" Long Silicone Hose Pieces
(3) 2.5 Inch Silicone Hose Pieces 3" Long
(2) 3.5 Inch Silicone Hose Pieces 3" Long
(1) 3 Inch Silicone Hose Piece 3" Long
(2) 1 3/8" X 2.5 Silicone Hose Pieces
(1) Brass Tee
(1) Turbo Oil Outlet Flange
(1) #10 Turbo Oil Outlet Extension Fitting
(1) 1 5/8 Inch Clamp For Wastegate Tube
(1) Punch For Oil Pan (Missing, I didn't need)
(1) K And N Air Filter
(1) Heat Wrap Roll (Missing, I replaced with Lava wrap)
(2) Stainless Fan Heat Shields 6x3 (Missing, I didn't need)
(2) Stainless Heat Shields For Steering Boots 4x5 (Missing, I didn't need)
(8) Metal Zip Ties
(10) Zip Ties For Ps Hose Retention (Missing, I used regular zip ties)
I would REALLY prefer a local type sale as shipping on this won't be fun. I'll meet up depending on the distance. If I do have to ship, I can, but it would have to be at the buyers expense.
This is not a box stock kit, it does not contain every last nut and bolt like Hellion ships it. I will give you everything that you need to make it work, but I didn't buy it new myself, so I myself don't have every last nut and bolt. That being said, any experienced car guy can get this all mounted up with very little effort. The core components and brackets are all there. You'll just need to bend a line here or there there type stuff.
This setup right at 800hp at the tires through a T56 on my built 2 valve.
I'll get pictures of everything laid out tomorrow and post them.
Asking $3500 OBO (price is somewhat negotiable, but please no low-ballers, you can't get a turbo setup like this anywhere else this cheap).
I've decided to include my dynomax race bullets and flowmaster tail pipes as they had to be angled slightly to work with the Y pipe that TBC fabricated.
Below is the rough list of what all is included.
(1) Turbonetics 76mm Turbo
(1) Turbosmart Ultragate Wastegate
(1) Bar And Plate Intercooler 24x6x3
(1) Tial Q Blow Off Valve
(1) Main Turbo Feed Pipe
(1) Automatic Transmission Crossover Pipe
(1) Manual Transmission Crossover Pipe
(1) Downpipe
(1) Exhaust Double Barrel
(1) Faux Catalytic Converter
(1) Exhaust Y-pipe (Was missing, I had one made)
(1) Small Wastegate Pipe
(1) Intercooler Pipe 1
(1) Intercooler Pipe 2
(1) Boost Inlet Pipe/Powder Coated
(1) Procharger Boost Inlet Elbow/Powder Coated
(1) Radiator Hose 1 5/8 Polished
(1) Turbo Support Bracket
(1) Intercooler Support Bracket
(1) Coolant Can Support Rod
(2) Ps Line Splices 3/8" (Missing, I didn't need)
(1) Ps Line Hose 10"Each/28 Ft (Missing, I didn't need)
(4) Ps Line High Pressure Clamps 3/8" (Missing, I didn't need)
(1) Oil Feed Line 47" #4
(2) 1/8 Pipe To #4 90 Degree AN Fitting
(2) 2 Inch Hose Clamps For Radiator Hose
(4) 3/4 Inch Hose Clamps/Idle Hoses
(4) 5/8 Breather Hose Clamps
(4) 4 To 4.5 Inch Hose Clamps
(4) Bypass Hose Clamps
(2) Metric Stainless Bolts For Wastegate
(2) 5/16 Stainless Bolts For Wastegate 1" Long
(1) Metric Bolt For Turbo Support Bracket/38mm Long
(1) Metric Bolt For Turbo Support Bracket/35mm Long
(2) Metric Bolts From Intercooler To Radiator Support
(4) Washers For Metric Bolts (Missing, I replaced)
(1) 1/4 X 3/4 Bolt Ps Line Cooler Bracket (Missing, I didn't need)
(2) 1/ 4x 3/4 Bolt For Elec Box Relocation (Missing, I didn't need)
(3) 1/4 Inch Nylock Nuts
(6) 1/4 Inch Washers
(1) Adel Clamp For A/C Line 5/16" Hole (Missing, I didn't need)
(1) 5/16 X1/2 Bolt To Secure Adel Clamp To Boost Hose (Missing, I didn't need)
(1) 5/16 Inch Washer
(2) Metric Bolts For Oil Drain To Turbo (Missing, I didn't need)
(2) Washers For Oil Drain (Missing, I didn't need)
(4) 3/8 X 1 1/2 Bolts, Nuts, And Washers For Turbo To Turbine Inlet
(2) 3/8 X 1 3/4 Bolts And Washers For Crossover Connection
(3) 3 Inch Torque Clamps For Exhaust
(1) Rubber Dog Bone 1.75" Center To Center
(1) Hanger For Exhaust
(0) 3/8 X 2.5 Bolts, Nuts, And Washers For Y-pipe To Mufflers (I replaced with vband clamps)
(2) Turbo Bracket Spacers Aluminum (Missing, I used washers)
(3) 5/16 X 3/4 Bolts, Nuts, And Washers For Intercooler Support Bracket, Exhaust Hanger
(1) #10 Straight Hose Fitting
(1) #10 90 Degree Hose Fitting
(1) #10 Line, Steel Braided, 1 Foot
(1) 3/8 To #10 Oil Return Fitting
(6) 2.5" Stainless T-bolt Clamps
(5) 3.5 Inch Stainless T-bolt Clamps
(1) 3 Inch V-band Clamp For Turbo Outlet
(1) 4"/3.5" Long Silicone Hose Piece
(1) 4"/2" Long Silicone Hose Pieces
(3) 2.5 Inch Silicone Hose Pieces 3" Long
(2) 3.5 Inch Silicone Hose Pieces 3" Long
(1) 3 Inch Silicone Hose Piece 3" Long
(2) 1 3/8" X 2.5 Silicone Hose Pieces
(1) Brass Tee
(1) Turbo Oil Outlet Flange
(1) #10 Turbo Oil Outlet Extension Fitting
(1) 1 5/8 Inch Clamp For Wastegate Tube
(1) Punch For Oil Pan (Missing, I didn't need)
(1) K And N Air Filter
(1) Heat Wrap Roll (Missing, I replaced with Lava wrap)
(2) Stainless Fan Heat Shields 6x3 (Missing, I didn't need)
(2) Stainless Heat Shields For Steering Boots 4x5 (Missing, I didn't need)
(8) Metal Zip Ties
(10) Zip Ties For Ps Hose Retention (Missing, I used regular zip ties)
I would REALLY prefer a local type sale as shipping on this won't be fun. I'll meet up depending on the distance. If I do have to ship, I can, but it would have to be at the buyers expense.
Last edited:
