Modular swap meet part II(mostly 03/04 Cobra)

[sidewayscoupe]

03/04 OEM Ford Harmonic damper (low miles) $80 shipped SOLD
03/04 OEM Ford emissions brackets/sensors (both) $30 SOLD
03/04 4.6 Ford Racing timimg cover NIB $200 SOLD

Diamond Pistons 30010 with -5.2cc dish/STD bore (3.552) moly coated skirts, plasma rings and 4130 pins (standard) NIB $600 shipped (cost $1050 currently as optioned) SOLD

NIB Speed of Sound 1994-2004 Ford Mustang Gauge Dual Gauge Pillar (discontinued) and SpeedHut SVT boost (0-30psi) and fuel pressure (0-100psi) gauges. I bought these from the original owner of my car and never installed them. The gauges basic gauges and senders are $350+ the custom graphics and whatever the pod was new. I am looking to get $350 OBO shipped for all three items SOLD

03/04 NOS intercooler but unfortunately it's a little beat up, should be savable with a little elbow grease and TLC. These are $650+ new, I was thinking I would start at $200 shipped SOLD

Prices are fairly firm, unless you want multiple items then I will bundle things to save you a few bucks.

[email protected]

More items to come.

Thanks,
Dan

 

[sidewayscoupe]

80 views and no bites....must have been high on prices, adjusted.

 

[pickup_man06]

I'm interested in the alternator. If I get paid for my exhaust today or in the next couple me an you can do some dealing

 

[sidewayscoupe]

TTT this stuff and more will be at Norwalk NMRA......

 

[03DSGKB]

alt bracket

What's your bottom dollar picked one up like to weeks ago for 27 bucks shipped

 

[sidewayscoupe]

What's your bottom dollar picked one up like to weeks ago for 27 bucks shipped

Not going to be anywhere close to $27, $70 would be the lowest I would do otherwise I will keep it.

 

[sidewayscoupe]

Bump

 

[sidewayscoupe]

Bump - The list will grow soon

 

[sidewayscoupe]

Prices dropped

 

[sidewayscoupe]

Bump

 

[sidewayscoupe]

Added to first post!

 

[sidewayscoupe]

Bump

 

[BLOWN9646]

PM sent on xcal2

 

[sidewayscoupe]

PM sent on xcal2

Replied

 

[sidewayscoupe]

Bundled a bunch of stuff to 95SC, thanks again man!

 

[sidewayscoupe]

Bump

Will post more pictures and parts this weekend

 

[cloned]

What's the condition of the blocks

 

[sidewayscoupe]

I bought them from KarKraft a long while back, and from what I under stand they are standard bore production engines that were tore down when the head tick issue first came up. Visually they are in good overall condition. I have the week off and can pull these out and take pictures if needed (my knee is jacked up so it might be tough)

I see you are out of state and didn't have plans on shipping these...

Thanks,
Dan

What's the condition of the blocks

 

[sidewayscoupe]

Been rainy/sh!tty here, so I am still working on making the list grow and additional photos.

 

[sidewayscoupe]

Bump