More 03/04 Cobra Parts

k_kenley

Member
Established Member
Joined
Jul 21, 2005
Messages
160
Location
Rancho Cucamonga, CA
Okay, here's the last of the Terminator parts that I have left to sell:

Twin Terminator fuel pumps ($100 FIRM shipped) - These are the stock purple top fuel pumps that I ran in my car with the 39lb injectors, and they were removed to install some Focus pumps when my set-up had about 5000 miles on it.

CobraPumps1.jpg


CobraPumps2.jpg


Accufab inlet elbow by itself ($80 shipped)

Accufab5.jpg


Accufab6.jpg


Accufab7.jpg


Accufab8.jpg


Stock Cobra Eaton Supercharger ($250 + shipping). This has a small amount of proting that I did myself, and I relubed the needle bearings at the same time with the blue grease that I bought from an Eaton rebuilder. It already has the 2.8 pulley on it. With EVERYTHING stock, except for the Accufab throttle body, Accufab inlet, cold air intake, and MAC cat-back system, my engine put out 534 RWHP with this blower. If you want, I can get the dyno print-out from that tune that will show the boost and HP. I will also post a video tonight of the blower spinning so that you can see that it spins freely with no strange noises.

Eaton1.jpg


Eaton2.jpg


Eaton3.jpg


Eaton4.jpg


Eaton5.jpg


Eaton6.jpg


Eaton7.jpg


MAC 03/04 Cold Air Kit ($75 + shipping) - This is the MAC cold air kit that comes with a K&N style filter. I will have the filter cleaned and freshly oiled when I send it to you.

MacKit.jpg


MacKit2.jpg
 

Users who are viewing this thread



Top