MPSS Font Tire Wear Scalloping

rrg

New Member
Established Member
Joined
Mar 19, 2013
Messages
29
Location
Plymouth Massachusetts
I have a 2014 GT 500 Vert with MPSS tires in stock sizes that were installed aprox 10K miles ago. The front tires, 265/40R 19's, have a lightly scalloped condition on the inside 2" of both front tires. You can feel the scalloped condition as you run your hand along the inner circumference of both tires. The scalloping runs from each small (2 inch long) longitudinal tread to the next longitudinal tread for the entire inner circumference of both front tires. I had the alignment checked by the Ford dealer in my area and all was within Ford specs.

Has anyone else had this problem and do you have a solution? Is it a MPSS tire problem or could the Ford alignment Specs improper for the MPSS tires?

Here are my alignment numbers for the front:

Caster:
Left 7.1 degrees
Right 6.9 degrees

Camber:
Left -1.1 degrees
Right -.09 degrees

Toe:
Left 0.00 inches
Right 0.05 inches
 

Users who are viewing this thread



Top