• Welcome to SVTPerformance!

Must have suspension mods for Drag use?

Discussion in '2013-14 Shelby GT500' started by Fastfish420, Feb 17, 2013.

  1. Fastfish420

    Fastfish420 New Member Established Member

    Messages:
    169
    Joined:
    Jan 17, 2013
    Location:
    Lancaster Ohio
    Im looking to do some Drag Racing no road racing!What would be the first mods to do without braking the bank.I already have a list of mods for the engine and also plan on the 305 M/T DR,and possibly a rear gear change to 3.73 or 4.10.

    Would spring change and Lower control arm/ adjustable panhard bar be the first mods?Looking at which springs and suspension to use so any suggestions would be great!I did a search but there are so many different brands is sorta overwhelming.Looking to run the 10.50 range...
     
  2. 0mineralgrey3

    0mineralgrey3 Spooooooolllllll Established Member

    Messages:
    3,236
    Joined:
    Nov 3, 2004
    Location:
    New Orleans
    Drag radials and a few bolt on engine mods should net those times with a decent driver.
     

Share This Page