I know many of you have seen my list from other forums. It is the same list. I have been asked to post it here as well.
Hooker Super Comp Long Tubes (Jet-Hot coated)
Hooker matching O/R X-pipe
MAC cat-back with 3 1/2 chrome tips
MIL’s
NGK TR6 Plugs
Mezeire elec water pump with relay
DNS wet nitrous oxide kit
Dual Purge (Outlet on each side of shaker)
Elderbrock bottle heater
NOS remote bottle opener
Steeda Sport Springs
Tokico Illumina 5 way adjustables on all 4 corners
Ground Pounder caster camber plates
Kenny Brown double-cross subfame connectors (welded)
HPM mega bite jr upper adjustable
HPM mega bite jr lower adjustable
Power Slot Pro-Slot rotors (rear)
FRPP 3.73 Gears
Moser 31 spline axles
FMS 31 spline carrier upgraded by Pyle Brothers (Baytown,TX)
Raytech bearings
MAC hd axle girdle
Weld Prostar XP's 16 x 8.5 (racing only)
BFG Drag Radials 255/50/16 (racing only)
BFG KDW 275/40/17’s on the rear on stock rims. (I liked the KDWS’ better, I will not put the KDW’s back on.)
D&D Performance 00' Cobra R T-56
D&D SHD Clutch
D&D Aluminum Drive Shaft
D&D Steeda Shifter
UPR Extreme firewall adjuster and quadrant
FRPP Drive Shaft Safety Loop
Hurst Chrome Stick and T-Handle
Cobra-Jet emblems on shaker
switched silver antenna for a black one
reflective black bumper inserts
Stock @ 1200 miles 268/291 SAE rwhp/rwtq
Modded n/a @ 18,000 miles 289.7/309.7 SAE rwhp/rwtq
Nitrous 125 shot, pilled 65/42 @ 18,000 miles 423.7/499.1 SAE rwhp/rwtq
Best et run ¼ 11.8722 @ 117.71 ……..Best mph run ¼ 11.947 @ 120.13
Hooker Super Comp Long Tubes (Jet-Hot coated)
Hooker matching O/R X-pipe
MAC cat-back with 3 1/2 chrome tips
MIL’s
NGK TR6 Plugs
Mezeire elec water pump with relay
DNS wet nitrous oxide kit
Dual Purge (Outlet on each side of shaker)
Elderbrock bottle heater
NOS remote bottle opener
Steeda Sport Springs
Tokico Illumina 5 way adjustables on all 4 corners
Ground Pounder caster camber plates
Kenny Brown double-cross subfame connectors (welded)
HPM mega bite jr upper adjustable
HPM mega bite jr lower adjustable
Power Slot Pro-Slot rotors (rear)
FRPP 3.73 Gears
Moser 31 spline axles
FMS 31 spline carrier upgraded by Pyle Brothers (Baytown,TX)
Raytech bearings
MAC hd axle girdle
Weld Prostar XP's 16 x 8.5 (racing only)
BFG Drag Radials 255/50/16 (racing only)
BFG KDW 275/40/17’s on the rear on stock rims. (I liked the KDWS’ better, I will not put the KDW’s back on.)
D&D Performance 00' Cobra R T-56
D&D SHD Clutch
D&D Aluminum Drive Shaft
D&D Steeda Shifter
UPR Extreme firewall adjuster and quadrant
FRPP Drive Shaft Safety Loop
Hurst Chrome Stick and T-Handle
Cobra-Jet emblems on shaker
switched silver antenna for a black one
reflective black bumper inserts
Stock @ 1200 miles 268/291 SAE rwhp/rwtq
Modded n/a @ 18,000 miles 289.7/309.7 SAE rwhp/rwtq
Nitrous 125 shot, pilled 65/42 @ 18,000 miles 423.7/499.1 SAE rwhp/rwtq
Best et run ¼ 11.8722 @ 117.71 ……..Best mph run ¼ 11.947 @ 120.13
