I think my shitbox is bent, and finally have enough coin/care to do something about it. Body shop guy quoted me $150 to put it on the laser machine and check it. I think I can AAA it one way and eat the $200 tow the other. He suggested I do the base measurements according to the FSM before even bothering bring it over.
I need the chassis manufacturing tolerances page out of a Ford Service Manual from a 1994 to 1998 Mustang. I have my 1998 one, but lent it out. Here is the page from my 1988 manual for reference when looking. Usually in the body section.
We always say the Fox chassis are the same 1979-2004, but I think there may be some subtle differences. Thank you to anyone who takes the time to assist.
I need the chassis manufacturing tolerances page out of a Ford Service Manual from a 1994 to 1998 Mustang. I have my 1998 one, but lent it out. Here is the page from my 1988 manual for reference when looking. Usually in the body section.
We always say the Fox chassis are the same 1979-2004, but I think there may be some subtle differences. Thank you to anyone who takes the time to assist.