Need help/advice on stock eaton 04 cobra...

[torquefreak]

Backstory..heard alot of noise coming from blower. Replaced front coupler. Noise was still there. So i pulled blower off,and found 1 of the rear needle bearings completely destroyed. Order the bearings to replace them.,and so these rear needle bearings wont come out. Ive tried freezing method,tried using a 3-leg bearing puller,and a slaptool. Ive never encountered bearings so difficult to remove. The crank pulley has nothing on these!!!! Im trying to get any help or advise from those who have removed them,or have the equipment to help me,im completely out of ideas. Im at the point almost where i just buy used eaton,and saying F'it. Thanks for any help