NEED HELP! Nitrous Q's???

[SN_95]

i am running a zex 75 dry kit bought colder plugs the autolite 24's in a 5.0 gapped to factory specs of .054 and i get spark blow out. what should i re-gap them too.

please and thank you.

Richard

yes i searched. no info found for 5.0

 

[BMF42]

and i get spark blow out. what should i re-gap them too.

What is this? Just curious:beer:

 

[SN_95]

the car feels like its missing when i shoot it. i figured the nitrous was blowing out the spark since it has like 1000 psi of pressure behind it and i had the plugs gapped at .054.

thanks for the smart ass comment though.

 

[ryans01]

.032 is what i run but its a 4.6 and I think I run 103's

 

[fourvalvegt]

you definitely need to take the gap down to around .035

 

[19mustang95]

i ran mine at .035

 

[BMF42]

thanks for the smart ass comment though.

It wasn't meant to be a smart ass comment, but what ever. Just didn't want to assume what it was. Good luck getting your plugs re gapped.

 

[Hockeyman48]

94 Cobra w/ 150 dry shot------plugs gapped at .040---no problems to 6k rpm. Did you do any ignition upgrades? A higher voltage output coil was must for me.I use one step colder plug(Motorcraft) AWSF 32 I believe.What RPM does it start missing at?

 

[SN_95]

ive got an msd ignitor coil and a summit distributor. it starts missing at like 4500 or so. i got them regapped to .040 and ready to try again. thanks for the input guys and sorry for the confusion BMF42.