I have just purchased a cnl cold air kit for my terminator,and I had the jlt kit on before but decided to change cause it barrely fit and for the price it just cheap as hell,shoulda stuck with the stock and a bigger mass air,well heres the problem.I installed it,except for the vacume line that is on the left of the cnl tube, kinda in the back near the throttle body,well I was missing the rubber elbow and just stuck the end of the line in the whole and started her up except she didn't want to start,so what im asking is,is that rubber elbow at the end of the vacume line my problem,she was fine with the jlt kit on,but now she won't start and I don't have a clue ,can someone please help me?
need help please!
- Thread starter 03BlownSVT
- Start date
check to make sure your MAF and IAT sensors are plugged in. other than that just make sure there are no leaks.
having that hose just stuffed in is probably your problem if its not a tight fit.
having that hose just stuffed in is probably your problem if its not a tight fit.
Users who are viewing this thread
