Need help. Stock suspension come on in

[03'Darin]

I've got a buddy building a 63 starliner with an 03/04 Cobra IRS in it. He needs the measurement of the stock factory rear spring length in the car at ride height. Does anyone have the stock rears spings that you could measure compressed length in the car at ride height?

My buddy that's building the car is the same guy that did the 57 Fords with the complete 03' driveline that had a thread on here. The cvar was in Hot Rod and Hemmings magazines.

Appreciate any help you can give. I've got Eibach's in my car so I can't help him

 

[Jimmysidecarr]

Mine are cut 1/3 of a coil, sorry.

Cool project though!:rockon::beer:

 

[03'Darin]

Mine are cut 1/3 of a coil, sorry.

Cool project though!:rockon::beer:

I'm afraid it's going to be tough finding someone with stock suspension. lol

 

[mu22stang]

28" (ground to wheel well center) at the rear with a stock suspension.

I don't have the spring compressed length though... so, this probably doesn't help.

 

[SpectorV]

my rear was about 28-28.25 ground to fender stock everything~ some can be a bit off but (no real perfect number for all and even side to side can vary)

 

[03'Darin]

Sorry guys I must not have explained it well enough. I need the measurement of the spring itself from end to end in the car when the car is sitting at normal ride height.

 

[10splaya22]

I can let you know in a couple days when I get my car lol

 

[03'Darin]

I can let you know in a couple days when I get my car lol

Hopefully he gets an answer before that. But if not it would be greatly appreciated.