need some help guys

[94_SvtCobra]

hey guys im new to the board, im not quiet sure if this is where this belongs but i have a 94 cobra, mods include cai, longtubes and flows, i want to purchase a NX kit and a nitrous cam but im not sure if its in best intrest if i do the cam yet, if you guys could give me some info i would really appriciate it :beer:

justin :thumbsup:

 

[TwoToneFreak]

Feed it a bottle. I would wait on the cam until you can get a intake to go along with it. But I have seen these cars really come to life with a decent cam.

 

[venomous]

Do you have gears? If not ditch the 3.08's that are probably in the diff. and get a good set of 3.73's from FRPP. I run an E-303 cam and I'm very happy. Lunati makes a cam that is very similar that performs very well too. Get the gears, subframes, then heads,cam and intake together. Good luck

 

[94_SvtCobra]

thanks guys,..venomus, i was thinking about purchasing some 4.10s and i think im gona go with a cam also and the heads and intake next month, should i go ahead and get rockers and ect.. or is it fine with just the cam