Need some (IRS)torque specs...

[Konaboss302]

So I'm replacing my diff cover with an LPW this weekend and I'm doing the drop driveshaft/front mount/push forward method (no halfshaft removal)... does anyone have the torque specs for the diff mounting points and whatever else I'll be removing under there... I'm pretty sure theres some high torque called for on some of those mounting points/bars. Any help would be appreciated. Thanks Guys!

 

[mu22stang]

IRS TORQUE SPECS
 ABS bracket-to-lower arm = 17 ft-lbs
 ABS bolt-to-diff = 5 ft-lbs
 Brake banjo bolt = 30 ft-lbs
 Brake caliper anchor bolts = 76 ft-lbs
 Brake caliper bolt = 25 ft-lbs
 Brake line-to-rear brake caliper bolt = 30 ft-lbs
 Diff cover = 25 ft-lbs
 Diff pinion nose crossmember-to-diff = 52 ft-lbs
 Diff pinion nose crossmember-to-subframe = 184 ft-lbs
 Diff rear insulator-to-axle housing bolts = 76 ft-lbs
 Driveshaft to pinion flange = 83 ft-lbs (Blue Loctite)
 Hub nut = 250 ft-lbs
 Lower arm and bushing-to-subframe bolts = 184 ft-lbs
 Lower arm and bushing-to-knuckle nut = 85 ft-lbs
 Parking brake cable bracket-to-lower arm bushing bolt = 11 ft-lbs
 Rear brake disc dust sheild-to-knuckle bolts = 89 in-lbs
 Stabilizer bar bracket bolt = 41 ft-lbs
 Stabilizer bar link nuts = 35 ft-lbs
 Subframe-to-body bolts = 76 ft-lbs (14mm bolts = 131 ft-lbs; 9/16” bolt = 145 ft-lbs)
 Subframe-to-rear bracket bolts = 76 ft-lbs
 Subframe rear bracket-to-body bolts = 59 ft-lbs
 Shock-to-lower arm and bushing bolts = 98 ft-lbs
 Shock-to-body nuts = 30 ft-lbs
 Toe link-to-subframe nut = 35 ft-lbs
 Toe link-to-knuckle nut = 35 ft-lbs
 Upper arm and bushing-to-subframe nuts = 66 ft-lbs
 Upper arm bushing-to-knuckle nut = 66 ft-lbs
 Wheel lugs = 95 ft-lbs

 

[MBoyle1]

that looks right! good info

 

[Konaboss302]

Thanks!!

 

[mycurse01]

Great info. Thanks for posting