Need torque specs please!!!

[RAZRS EDGE]

Ok, according to the Stiegemier sheet that was sent with the blower, its says that the bolts for the intake manifold to the heads are only 8ft/lbs?? Is it really only that much? Just want to double check. Thanks :thumbsup:

 

[dun4791]

Actually the correct torque is 89 INCH pounds. Or 7.41 ft/lbs.

Lyle

 

[dun4791]

And go around 3 times at that torque. No steps just 3 times

Sequence is from front of blower on pass side 9 5 1 7 3

driver side 10 6 2 8 4

Hope this helps...........Lyle