New PB..TVS Cobra
- Thread starter SNK-BITE
- Start date
Great pass Chris. You might want to post some details for everyone else, lol.
Yes details lol, bc thats a nasty slip
03 Cobra coupe
T56-RXT-26 Spline
MM diff and carrier bushings
DSS level 5's
Stock 3.55
Bone stock suspension except HR Race springs
Full weight minus rear seat delete
Untouched long block
longtubes with OR-x Magna flow CB
TVS 3.0/4# E85 Returnless
Bogarts with 28" Hoosier bias
Black cars can expect similar results as that is the fastest color lol.
T56-RXT-26 Spline
MM diff and carrier bushings
DSS level 5's
Stock 3.55
Bone stock suspension except HR Race springs
Full weight minus rear seat delete
Untouched long block
longtubes with OR-x Magna flow CB
TVS 3.0/4# E85 Returnless
Bogarts with 28" Hoosier bias
Black cars can expect similar results as that is the fastest color lol.
Nice pass. 110 mph is get'n it done!
Car is flying!
I will let others speculate but, the general consensus I keep hearing is upper 9's based of ET and MPH. It might do it, guess we will see.
Depending on how hard the car runs on the big end, it's looking like your right at the 9.99-10.06 range with info given.
I'd venture to guess that would be a lower 10 pass with everything considered. Most likely in the teens, possibly oh's.
We have similar setups and my 10.08 was a 6.54 in 1/8th. Same 60'. Should be close, guess we'll find out this Saturday.
Damn! I guess I was slightly off. I was thinking 3.6x ish difference in 1/8th to 1/4. Maybe I should have been thinking more along the lines of 3.5x ish. Either way, these cars are flying now!
Dam what that thing make on the dyno?
Congrats! That thing is flying! You have the fastest stock TVS IRS car! 
Its been on a dyno once but the numbes are not right as it was blowing the tires off and tune had to be finished remotely on the street. Made 600 but I know thats way off given how well the car is running.
Last edited:
Congrats on the new PB, its good to see a IRS car cutting 60s in the 1.4 range. Gives the rest of us a gimmer of hope....... lol. Have you thought about putting a 3:73 gear in?
I thought about it. Its still a possibility. It would definitley help out as I am running a 28" slick which is a bit much for 3.55's.
For a IRS car that's moving, really impressed.
What rpm were you leaving at?
Users who are viewing this thread
