No start

CFulton89

Member
Established Member
Joined
Jun 4, 2013
Messages
105
Location
Trussville, Alabama
Need help installed motor won't start

I need help I just dropped the engine back in the cobra, and it will not start the theft light flashes while cranking, I have file and I have fire but it will not start. This is extremely aggravating. Where do I start I pulled the plugs out they have fuel on them and laid them against intake and getting a spark.
 
Last edited:

USMC53CHIEF

Active Member
Established Member
Joined
Jan 4, 2011
Messages
1,228
Location
Medina, Ohio
Ok, I just went through this when I rebuilt mine..... First question... Did you reinstall the crank trigger wheel?
 

mwolson

Gray beard
Established Member
Joined
Mar 28, 2004
Messages
3,411
Location
San Jose, CA
If the theft light is flashing, it won't start due to the PATS.

In my car, the theft light flashes when I open the door. It stops flashing when I close the door. Then I put the key in the ignition and turn it to the on position, the theft light goes on for a few seconds, then goes off. While cranking, the theft light stays out, and my car starts.

So start digging into your PATS. Fortunately for me (but not for you) I have never had a PATS issue, so I have never had to dig into the system to debug it...
 

Users who are viewing this thread



Top