Official Bigs and Littles/Drag Setup Picture Thread

[Blk03CobraVenom]

How well do the rears line up with the fenders? I have front RT-S wheels and I am looking to pick up some 15 in rears over the winter and I am still on the stock IRS as well.

They're tucked in a bit, but seem to function just fine. Improved my 60 a lot. From 2.1-1.7. But I'm still practicing technique and playing with tire psi. So there's probably room for improvement. BTW my rears are 16 inch. If you go 15 you will need to grind the calipers. Reason why I opted for bigger.

 

[99saleenspeedster]

 

[BMR Tech]

Will have better soon.

 

[vrt03cobra]

I like ...

 

[Wynn]

This car looks great. Needs dark tint though!

Any numbers?

 

[thundr306]

At the track....not a hq pic though.

 

[cobrasvtcoupe25]

Bump

What low profile brake lines work with cobra rear brakes and a 15x10(6.5 BS) wheel???

I want to run 17x4.5 up front and 15x10 w/ 6.5 backspacing with cobra brakes all around. (Note: I have Mach 1 rear end, no IRS)

(E.g. - http://www.pro-dyno.com/mobile/Product.aspx?ProductCode=Stifflers-BHK-MUST-9904)

 

[bigdave03svt]

DPC_8929 by D.C. 83, on Flickr


DPC_9042 by D.C. 83, on Flickr



DPC_9052 by D.C. 83, on Flickr

 

[F8L BYT]

DPC_8929 by D.C. 83, on Flickr


DPC_9042 by D.C. 83, on Flickr



DPC_9052 by D.C. 83, on Flickr

Good lord that's perfect!

 

[rtusnake]

Bump

What low profile brake lines work with cobra rear brakes and a 15x10(6.5 BS) wheel???

I want to run 17x4.5 up front and 15x10 w/ 6.5 backspacing with cobra brakes all around. (Note: I have Mach 1 rear end, no IRS)

(E.g. - http://www.pro-dyno.com/mobile/Product.aspx?ProductCode=Stifflers-BHK-MUST-9904)

I ran the mm rear lines when I had the irs to clear a 15x10 with 6.5bs. I reused the same lines when going sra. Believe the ones in the link you have will work as well. I still had to grind the banjo bolt just a tad

http://www.maximummotorsports.com/MM-Stainless-Brake-Hose-Kit-1999-04-IRS-Cobra-rear-P1223.aspx

 

[mg03]

 

[mg03]

 

[bleedingfordblu]

DPC_8929 by D.C. 83, on Flickr


DPC_9042 by D.C. 83, on Flickr



DPC_9052 by D.C. 83, on Flickr

cant get over it, perfect zinc yellow

 

[Gravik]

Any Cobra guys have Weld Prostars in back and stock cobra wheels in front?

 

[bigdave03svt]

Good lord that's perfect!

thanks, it took about 5 different wheel and tire combos before I found the one i like . then I took half a day adjusting ride height on all corners to get the perfect stance!

cant get over it, perfect zinc yellow

thanks!

 

[draggin50]

Here is a crappy cell phone picture of mine. I will be changing the rears out for a set of 28x10.5's and powder coating the rears black also.

 

[blackedout06]

DPC_8929 by D.C. 83, on Flickr


DPC_9042 by D.C. 83, on Flickr



DPC_9052 by D.C. 83, on Flickr

IRS or Solid rear? Specs on the rear wheels either way?

 

[mr-proper]

new setup. 17x8 with 245 invos and 15x9.3 with 275 nt555r
better pics are coming:beer:
care by hoffmann861, on Flickr

15x9.3 are 10lbs lighter each compared to afs 10.5 mach 1 wheels.
984286_918409748192019_7915993295161105704_n by hoffmann861, on Flickr

17x8 each wheel is 7lbs lighter then the factory mach 1 17x8 wheel!:beer:
image2 by hoffmann861, on Flickr

no grinding needed for the rears (04 mach 1 SRA)
image1(1) by hoffmann861, on Flickr

 

[Yulla]

^ That looks great, can't wait to see more pics of the Welds.

 

[admanboss302]

Bogart RT