You would have to build it yourself. Check out corral in SOHC section and check out 97Stanger97 breather tank setup. It's clean with black braided hoses and fittings. It won't be cheap either fittings cost a lot.
I used a Moroso can with double inputs (p/n 85473). I then put 3/8 to -10 fittings and other various parts to make up my system using Fragola push lock fittings and Goodyear Insta Grip black braided hose. But, you could use any hose type. Not the best picture, but mounted where my old secondary air injection pump was. I also used the push in -10 fittings on the valve covers and Fragola 90 degree fittings (like you see coming off the one side of the can)