quick question, what PSI do you guys see at idle, cruise and WOT?
May 17, 2008 #1 01 Venom Active Member Established Member Joined May 31, 2006 Messages 3,104 Location Long Island quick question, what PSI do you guys see at idle, cruise and WOT?
May 18, 2008 #2 01 Venom Active Member Established Member Joined May 31, 2006 Messages 3,104 Location Long Island bump
May 18, 2008 #3 VirtualSVT lolololololololololol Established Member Joined Dec 9, 2004 Messages 25,685 Location Tallahassee somewhere in the middle of NORMAL...lol
May 18, 2008 #4 Q Quadcammer 4cams aren't better then1 Established Member Joined Nov 21, 2002 Messages 11,540 Location jersey Like 15 psi at idle (you should see 25 with a stock motor) 62 at 2700rpm cruise (you should see 75) wot, at least 80 above 3k. I see about 75 to 80 max at redline, but I also have the gauge at the blower feed port, so my pressure is a bit low. I also have billet oil gears, so my pressure is low as well.
Like 15 psi at idle (you should see 25 with a stock motor) 62 at 2700rpm cruise (you should see 75) wot, at least 80 above 3k. I see about 75 to 80 max at redline, but I also have the gauge at the blower feed port, so my pressure is a bit low. I also have billet oil gears, so my pressure is low as well.
May 18, 2008 #5 01 Venom Active Member Established Member Joined May 31, 2006 Messages 3,104 Location Long Island I have my gauge in the oil cooler where the plug is near the stock sending unit. I am seeing like 40 at idle 70 at cruising 2200 RPM and above 85 almost 100 at WOT
I have my gauge in the oil cooler where the plug is near the stock sending unit. I am seeing like 40 at idle 70 at cruising 2200 RPM and above 85 almost 100 at WOT
May 18, 2008 #6 Q Quadcammer 4cams aren't better then1 Established Member Joined Nov 21, 2002 Messages 11,540 Location jersey the stock 4v produces a lot of pressure. while I think your numbers are overly high, they are normal for the factory (i.e. I think it runs too much pressure in stock form), but I think mine are a touch low.
the stock 4v produces a lot of pressure. while I think your numbers are overly high, they are normal for the factory (i.e. I think it runs too much pressure in stock form), but I think mine are a touch low.
May 19, 2008 #7 01 Venom Active Member Established Member Joined May 31, 2006 Messages 3,104 Location Long Island ya its all stock, I think it will pin will my 100 PSI gauge though at WOT, I thought it was alot os pressure also. I hope it dont break my gauge heh
ya its all stock, I think it will pin will my 100 PSI gauge though at WOT, I thought it was alot os pressure also. I hope it dont break my gauge heh
May 19, 2008 #8 W wallie40 Active Member Established Member Joined Apr 9, 2004 Messages 2,090 Location Los Angeles i see 25-30 at idle cold, 20-25 hot at idle , 60 crusing, almost 100-105 @ WOT. I am pulling from the same port you are pat.
i see 25-30 at idle cold, 20-25 hot at idle , 60 crusing, almost 100-105 @ WOT. I am pulling from the same port you are pat.