Oil sending unit/starter relay

[Lightning28307]

Hey guys who has changed them and how difficult are they??
please give me a 1-10
1=air filter
10= blower

 

[ChrisNelson]

Starter Relay is a 0. (I give the Blower a 4, and the Torque Converter a 9.) I've never done the Oil sending unit, but once you know where it is, it's probably easy.

 

[CaliBolt]

Oil sending unit is pretty easy, I give it a 3. The only reason for the 3 is its a bit tight fit (but you can move the line thats in the way), oil pours out for a sec (but not a strong flow, just a little one you can easily plug), and it was hard for me to find. I kept looking at the bottom rear of the motor near the filter, and then I realized it is in the front on the bottom drivers side. Once you know what the oil sending unit looks like you will undoubtedly see it. I can post a pic of it if you need one! But real easy and simple install!

Marc G

 

[CaliBolt]

Here are the pics you requested...

This is to show you the location of the sending unit. Hope this helps...

And here is what it looks like close up, anything else you need let me know!

Marc G