SOLD
Selling my 4r70w that I've had in my 2003 Cobra for the last 4 years!
Total of 6400 miles on all parts below
Only 1500 miles since tranny was completly gone thru by Performance Automatic with the car at their shop!
Package deal consists of:
-Performance Automatic built 4r70w, best of everything in it.
-Performance Automatic manual valvebody
-Transbrake
-Electronic Overdrive (engaged with toggle switch)
-Electronic Converter lock-up (engaged with toggle switch)
-Performance Automatic Deep aluminum tranny pan with drain plug
-Tranny fluid fill tube and dipstick
-Precision Industries 3-disc lock-up converter (currently a 4000 flash stall, 4500 TB stall, and 3200 foot brake stall)
-Performance Automatic 8-bolt SFI approved flexplate
-All flexplate to crankshaft bolts
-All converter to flexplate bolts
-4r70w block plate
-Converter inspection cover and bolts
-All bellhousing to engine bolts
-4r70w transmission crossmember
-Two B&M Supercooler transmission coolers (big ones with 1/2" npt connections)
-Custom built to length Driveshaft built by Denny's Driveshaft with high speed balance (1330 U-joint on front, and 1350 U-joint with '03 Cobra pinion flange on rear).
Tranny and converter purchased brand new from Hermann @ HBH, all other parts purchased brand new from Ford, or listed vendor!
I have over $6800 (if not more) invested in the above items!
$3800 for everything above - picked up or meet up withen 2.5 hours of Ft. Wayne, IN!
Thanks,
Ken
Selling my 4r70w that I've had in my 2003 Cobra for the last 4 years!
Total of 6400 miles on all parts below
Only 1500 miles since tranny was completly gone thru by Performance Automatic with the car at their shop!
Package deal consists of:
-Performance Automatic built 4r70w, best of everything in it.
-Performance Automatic manual valvebody
-Transbrake
-Electronic Overdrive (engaged with toggle switch)
-Electronic Converter lock-up (engaged with toggle switch)
-Performance Automatic Deep aluminum tranny pan with drain plug
-Tranny fluid fill tube and dipstick
-Precision Industries 3-disc lock-up converter (currently a 4000 flash stall, 4500 TB stall, and 3200 foot brake stall)
-Performance Automatic 8-bolt SFI approved flexplate
-All flexplate to crankshaft bolts
-All converter to flexplate bolts
-4r70w block plate
-Converter inspection cover and bolts
-All bellhousing to engine bolts
-4r70w transmission crossmember
-Two B&M Supercooler transmission coolers (big ones with 1/2" npt connections)
-Custom built to length Driveshaft built by Denny's Driveshaft with high speed balance (1330 U-joint on front, and 1350 U-joint with '03 Cobra pinion flange on rear).
Tranny and converter purchased brand new from Hermann @ HBH, all other parts purchased brand new from Ford, or listed vendor!
I have over $6800 (if not more) invested in the above items!
$3800 for everything above - picked up or meet up withen 2.5 hours of Ft. Wayne, IN!
Thanks,
Ken
Last edited: