Parting out 2003 Cobra Turbo Drag Car!!!!

eleanordream

New Member
Established Member
Joined
Sep 18, 2006
Messages
166
Location
Texas
Ok all, Time to start getting ready to Part her out. Asking price for complete car is 35k obo. Will be for sell complete until one of two things is sold, The motor or The chassis. If you want any of the other items help me sell the first two. So here it goes.

link to car sell ad: IF YOU ARE LOOKING FOR PARTS POST ON THIS AD NOT THE LINK AD. THE LINK IS FOR THE COMPLETE CAR. THANKS
http://www.svtperformance.com/forums/showthread.php?932312-88mm-Turbo-03-Cobra-Drag-car


2003 Cobra Rolling Chassis: $11,500 obo
MiniTubbed rear
UPR upper and lower adjustable in rear
full UPR coilover front suspension
Champion Magnum style double beadlock wheels on rear, 29x10.5w rear tire
Champion Magnum Front Runners
5/8 rear studs
solid axle with coilovers and 9"ends
35 spline axles and spool
3:55 gears
wishbone locator
8.50 cage. through the floor subframe connectors.
Flaming River manual rack
Schoneck Fiberglass Dash with Dzus Fastners
VFN Cajun style Hood with dzus fastners
Racecraft Dzus hood Rails
Skinny Kids Parachute System with Stroud chute
Stroud Window Net
Kirkey race seat with red cover
Removable Steering Wheel
Strange Front Brakes
Strange Manual Brake Booster
Wilwood Rear brakes
Racecraft steering shaft assembly

Motor: $6500 obo
2003 Mustang Cobra 4v DOHC
Forged Crank With ARP Main Studs
Forged Manley Rods with ARP 2000 Rod bolts
Forged JE Pistons 9:1 Compression
Stage 3 Ported and Polished Heads with ARP head Studs
03 Cobra Cams
MMR 7qt oil pan with turbo drain
Red powdercoated Valve covers

Prices to be released once the motor or chassis sells:
AMS-1000
BS3 for Mod Motor with ls1 coils
Racepak Dash and sensors Boost and Oil
Champion wheels w/tires- if not sold with chassis
Strange Front brakes- if not sold with chassis
Wilwood rear brakes- if not sold with chassis
88mm Turbo 8884 HP8889
88mm Turbo kit with a/w aftercooler and noribuilt headers
T400 Trans with stall and PA adapter ring and Bellhousing
PA 8-bolt Flexplate
Driveshaft with strange yoke and 1350 u-joints
Painless Electrical harness with switch panel
Painless Red button Shutdown with solenoid
Chiseled 8 gal Fuel and 5 gal water tank combo with Rule pump
Painless Alternator kill solenoid
Overflow tank Radiator
Expansion Tank radiator
Blow bye Tank
Moroso Remote oil filter setup with lines
B&M Trans cooler
Aluminum Radiator and Electric Fan
Skinny kid Parachute kit-if not sold with car
Hurst pistol grip Shifter with TB button
Vair on board compressor and tank
Yellow top Optimas x 2
Aluminum Battery boxes x2
Accufab 90mm TB
Sullivan intake with fuel rails
Sheet metal upper intake plenum with ports
120lb injectors accelertronics
Weldon 2035 fuel pump
Meziere electric water pump

IMG_0532_zps9ddcbb9c.jpgIMG_0527_zpsdc7702a1.jpgIMG_2416_zps9339601a.jpgIMG_2418_zps9b2c46bd.jpgIMG_2419_zps3b6017ce.jpg
 

eleanordream

New Member
Established Member
Joined
Sep 18, 2006
Messages
166
Location
Texas
Once the chassis or motor sells i'll shoot it over to you. I have the car listed for sale complete as well and don't want to make promises or anything on it until one of the two sell. Thanks.
 

Users who are viewing this thread



Top