List Updated Friday 10/25/13
I'm parting out everything on my car down to the frame. Read my sig carefully as it lists the mods in them. Besides that all the stock parts like dash, mirrors, visors etc are on the car.
Car has 65k miles on it. Most items have 5-10k miles on them that are aftermarket.
Engine
KIT IS BRAND NEW IN BOX
($3000) +2000hp Rotating Assembly (Package)
Complete Rotating Assembly Balanced
4.6L Modular 4V 5.0L Stroker Kit
Kellogg Stroker Crank
Manley Lightweight Competition Stroker Billet Rods
CP -23 Dush +.020 Bore Pistons
Stainless Steel File Fit +.020 Rings
King HP Main Bearings
King HP Rod Bearings
High Capacity Windage Tray
($650) Complete Heads
($600) Stock short block (cyl 2 melted)
($500) Teksid Block bored .020 over and decked
Eaton Setup
($600) Posi Race Ported Supercharger Throttle Body & Plenum, Stock Pulley
Heat Exchangers
($300) Velocity Stage 3 - Rough Shape, Holds fluid 100% under pressure.
($150) Afco - Rough Shape, Holds fluid 100% under pressure.
Turbo
($900) Borg Warner T4 ST78 1.10A/R Turbo
($170) Greddy Profec Type-S Controller
Fuel System (Package)
($1200) x3 Walbro 255lph GSS342 Return Pumps
CPR Fuel Rails
Fore Triple Return Hat
MagnaFuel 2k HP Regulator
8an Feed & Return Lines
Tuning
($250) ECU Locked to SCT Xcal3
($175) SCT Xcal3 Locked to the above ECU
($150) N2MB 2-Step/Wot Box
Electronics
($70) FPDM
($300) PCM
($200) Gauge Cluster
Body
($350) Side Mirrors (black)
I'm parting out everything on my car down to the frame. Read my sig carefully as it lists the mods in them. Besides that all the stock parts like dash, mirrors, visors etc are on the car.
Car has 65k miles on it. Most items have 5-10k miles on them that are aftermarket.
Engine
KIT IS BRAND NEW IN BOX
($3000) +2000hp Rotating Assembly (Package)
Complete Rotating Assembly Balanced
4.6L Modular 4V 5.0L Stroker Kit
Kellogg Stroker Crank
Manley Lightweight Competition Stroker Billet Rods
CP -23 Dush +.020 Bore Pistons
Stainless Steel File Fit +.020 Rings
King HP Main Bearings
King HP Rod Bearings
High Capacity Windage Tray
($650) Complete Heads
($600) Stock short block (cyl 2 melted)
($500) Teksid Block bored .020 over and decked
Eaton Setup
($600) Posi Race Ported Supercharger Throttle Body & Plenum, Stock Pulley
Heat Exchangers
($300) Velocity Stage 3 - Rough Shape, Holds fluid 100% under pressure.
($150) Afco - Rough Shape, Holds fluid 100% under pressure.
Turbo
($900) Borg Warner T4 ST78 1.10A/R Turbo
($170) Greddy Profec Type-S Controller
Fuel System (Package)
($1200) x3 Walbro 255lph GSS342 Return Pumps
CPR Fuel Rails
Fore Triple Return Hat
MagnaFuel 2k HP Regulator
8an Feed & Return Lines
Tuning
($250) ECU Locked to SCT Xcal3
($175) SCT Xcal3 Locked to the above ECU
($150) N2MB 2-Step/Wot Box
Electronics
($70) FPDM
($300) PCM
($200) Gauge Cluster
Body
($350) Side Mirrors (black)
Last edited: