Power goal ideal?

2001SilvrGT

Member
Established Member
Joined
Jun 22, 2011
Messages
376
Location
Long Island, New York
I got a 99 cobra with a procharger p1sc maxing 8 psi right now I fully built the motor. Im installing KB BAP an upgrading the injectors to 60lbs i would go return style but budget a little low right now an i already have the KB BAP someone gave to me but the car made 410rwhp and 367rwtq before the motor was built any idea what ill be making i dont know if itll helps got full exhaust and a power pipe and motor is bored .020 over im hoping to be in the 500-550rwhp range
 

blownstang4.6

Active Member
Established Member
Joined
Nov 8, 2011
Messages
469
Location
Chicago
On my Mach 1 i'll be running 10-11psi on an S trim through an auto and hope for around 460rwhp. With full exhaust and 10psi, hopefully because of the powerpipe, through a stick you will be around 475rwhp.
 

nxhappy

Well-Known Member
Established Member
Joined
Dec 16, 2006
Messages
10,031
Location
AZ
horsepower will be about the same. crank up the boost, 12-14 psi should be no problem. Keep the timing conservative. My old 4.6 wasn't built, she made 420whp with 14psi (vortech)
 

blownstang4.6

Active Member
Established Member
Joined
Nov 8, 2011
Messages
469
Location
Chicago
horsepower will be about the same. crank up the boost, 12-14 psi should be no problem. Keep the timing conservative. My old 4.6 wasn't built, she made 420whp with 14psi (vortech)

I'm guessing this was on a 2v? Even on a 2v that is low for 14psi. My 03 GT made 411rwhp on 12psi with a Vorrtech V1 S trim and 17 degrees of timing. Stock motor.
 

Users who are viewing this thread



Top