Power steering assist and ABS service needed error on my 2104 GT500

[GlennB]

I've checked the fuse block on the battery terminal and its good, car has been sitting a while not sure what else to check.

 

[blkGT500nCA]

Check your voltage on your battery. Mine does weird lights when it was low

 

[GlennB]

its a brand new battery, had to replace it due to it wouldn't charge. after replacing the battery that's when the errors started.

 

[OX1]

its a brand new battery, had to replace it due to it wouldn't charge. after replacing the battery that's when the errors started.

My 14 GT, after a stone dead battery was stuck in 2nd gear only (auto) for like a day one time. I didn't read codes or anything, but just drove it a bit, shutting it down and restarting multiple times. It eventually cleared itself up.

Other option is go to autozone/adv auto and get them to read codes (if you have no scanner).

3rd option is to get FORSCAN if you have pretty much any laptop. It's real cheap (compared to comparable higher end scanners) and you can scan codes yourself (and even read live data if you know what you are looking for).

 

[BCICAN]

Did you get this fixed ?
I had this happen myself and read in another forum where someone else had the same problem They ended up finding the cause it was a burnt wire that had been hitting the exhaust

 

[GlennB]

Did you get this fixed ?
I had this happen myself and read in another forum where someone else had the same problem They ended up finding the cause it was a burnt wire that had been hitting the exhaust

Not yet, I plan on taking it to the dealership this weekend. Didn’t have any thing wrong with the car until the battery went dead. It had been covered in my garage for months. Hopefully it’s something simple.

 

[BCICAN]

I Hope so too ,good luck! let us know how it goes . If you haven’t already try checking the wire assembly connectors too. I found one that was messed up on mine . It was the 6 wire MAF wire assembly plug that connects to the male plug connected to the large 14290 wire assembly. It was the last one I checked too , I’m just that lucky lol ( I may be calling them the wrong names forgive me I’m exhausted lol ) that connection has 6 wires so the car was getting MAF codes and IAT codes etc but my car also recently had the same code you first mentioned. I’m still working on it ,time to work on it has been limited lately , but those who know the cars history think that’s probably what has been causing all the issues . Maybe that can help you
I attached pics so maybe what I’m saying makes more sense . I used the green wire to flag the one that messed up when the other plug broke when I pulled it out . I removed the CAI to get to everything easier

I've checked the fuse block on the battery terminal and it’s good, car has been sitting a while not sure what else to check.

 

[Catmonkey]

Have you checked for rodent damage? When a car sits and random issues crop up when you start it, it's the first thing I think of.