Very cool guys, Jason was very cool and got my Steeda intake and BBR tune installed within 1 hour. That was with me talking his ears off. These guys will be doing my gear swap as well!!! very cool shop- I highly recommend them!!
It does use the larger rear pinion bearing. Ran into this when I changed my gear.
It does use the larger rear pinion bearing. Ran into this when I changed my gear.
I'm in orange park. My clutch was ok but when i would power shift wot it would not engage quick enough and then it stuck to the floor once so i had to do something so i took it apart and pulled the spring out now it is nice lots of feel. If the rain holds out i'll be out tonight. pm me for location
I'm in orange park. My clutch was ok but when i would power shift wot it would not engage quick enough and then it stuck to the floor once so i had to do something so i took it apart and pulled the spring out now it is nice lots of feel. If the rain holds out i'll be out tonight. pm me for location
i feel the same thing, you pulled a spring out, please give me some pics of this
read http://www.svtperformance.com/forums/2011-mustangs-354/712161-11-5-0-e-z-clutch-sticking-fix.htmlPlease let us know in deatil how to fix thanks!!!