pulley combo resource

[sgtboylan]

I wanted to help make a thread that talks about what setup your using. All need is to put down is what
Engine size and specs:
Headunit:
Pulley size:
Brand of pulley:
Crank pulley:
How many rib set up:
Belt Brand and size:
Any Belt Slippage:
I.C. / non I.C.:
Lbs of boost seen:


thans again

ASh

*this is a repost from another site, but it got no hits and I think its a good idea to have to help w/ pulley questions, O.D. pulleys, etc... not sure if this has been covered... -Dylan

 

[sgtboylan]

Engine size and specs: 4.6L 32v mach 1 8.5:1 comp. ratio
Headunit: vortech V2 T-trim
Pulley size:2.8
Brand of pulley: vortech
Crank pulley: stock
How many rib set up: 6
Any Belt Slippage: no
I.C. / non I.C.: FMIC
Lbs of boost seen: 16

I know boost will vary based on everybody's set ups, but just as a reference...

 

[Stanger00]

What are the engine RPMs at YOUR max boost?

Example. I see 16psi max boost reading at 7k rpms.

 

[sgtboylan]

yeah, that too. lol. 6800 rpms... i should at peak boost and rpms. thanks