Rebuilt engine and have this part I dont know where it goes

ctgreddy

Well-Known Member
Established Member
Joined
Mar 30, 2011
Messages
4,166
Location
MI
That's part of the pcv vacuum lines. the long part goes to a nipple underneath the lower intake. I just deleted my pcv over the winter and capped the nipple under the intake and removed that section all together.
 

cj428mach

Well-Known Member
Established Member
Joined
Sep 21, 2012
Messages
7,609
Location
Kansas
yep. The long hose goes to bottom of intake, then one elbow goes on the back of the blower and the other goes to the plastic pipe that runs to the pass side valve cover.
 

SVT_Troy

Well-Known Member
Established Member
Joined
Jun 23, 2011
Messages
5,324
Location
Virginia
That's part of the pcv vacuum lines. the long part goes to a nipple underneath the lower intake. I just deleted my pcv over the winter and capped the nipple under the intake and removed that section all together.

same thing I did. I put a plug in the lower intake hole and put filters on both valve covers. You either run filters on both covers or run a pcv system. Don't mix the both.
 

Users who are viewing this thread



Top