Gonna start building a shortblock for my 95GT swap car. Running a Stage IV ported blower. Car will be on E85. What pistons would you run and what Compression Ratio would you suggest?
Recommendation on CR for shortblock
- Thread starter 96juicedGT
- Start date
Yeah it will be an E85 car only.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
- Joined
- Apr 26, 2016
- Messages
- 106
what are the long term goals? are you going to eventually upgrade to a bigger tvs/whipple/kb?
10:1 minimum.
if i was staying with the ported eaton i would personally run 11:1 and ~15lbs. with the increased compression, you wont need to run the blower as hard and with the eatons, heat is your number one enemy.
id look into getting some custom Gibtec pistons.
10:1 minimum.
if i was staying with the ported eaton i would personally run 11:1 and ~15lbs. with the increased compression, you wont need to run the blower as hard and with the eatons, heat is your number one enemy.
id look into getting some custom Gibtec pistons.
Users who are viewing this thread
